Has anyone used Insight for Revit to document the LEED Daylight Credit If so, would you recommend it?

Thanks,

_Ilana

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Adapting the Construction Process for Passive House. We hope you will join us!

Register HERE.

Adapting the Construction Process for Passive House
Wednesday, April 28th, 2021
2pm - 3pm ET (11am - 12pm PT)

Description
... Read more

MSA has issued a safety advisory because they have received field reports that their green colored MSA V-Gard Protective Caps are cracking. Please share this with your safety staff if they do not already know. Let's keep everyone safe!

Apologies if some of you are seeing this for the second time - on behalf of Frances Yang, Mike Gryniuk and the Carbon Leadership Forum, consider signing on in support of the SE 2050 Challenge for structural engineers. (Yes, there is an option to sign on as a non-structural engineer, in support of the program.)

http://... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Hi Fellow SDLers: I'm sure you're like me and thrilled at the news of the Senate's passage of the historic climate bill yesterday. And also are likely on pins and needles until it's passed the House and signed into law. What a conclusion of a terrible roller-coaster ride that is our Congressional system.

I'm writing to pass along a... Read more

ASHRAE 209 in all its glory has been uploaded. This will impact our architectural process, for better or worse, so we should embrace it and learn from it. The revised AIA Energy Modeling Design Guide (due out next year) has been timed to correspond roughly to 209 coming out and will include references to it. The first few energy modeling '... Read more

Welcome to the quiz portion of Making Windows Work Better.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand when window attachments may be used in lieu of window replacements.
2. Summarize why optimal management of heat loss and gain may require both interior and... Read more

This may seem a bit in the weeds, but I have typically paid extra at Greenbuild for the access to the materials after the conference - we use that to develop presentations back to the teams who are not able to attend. For many years it was helpful - getting some materials to help folks see what they missed.  Last year they went to a new service... Read more

I've been hearing a lot of talk about density becoming a thing of the past. Like with the danger of antimicrobials, it would be great to have some more in depth backup information on whether density is really a danger factor, or if other factors are more important, when we go into these conversations. Does anybody have any new or better... Read more

Hi All,

We’re planning a conference here in Boston, October 23rd & 24th, focused on Designing for People.  We’re rounding out our speaker lineup and I thought I’d reach out to you all for ideas.  If you had an all-star list of people speaking on Health and Wellness in the Built Environment who would be on that list?  Send me 3 names... Read more

Hello Green Gurus, here's a reminder that this webinar is happening one week from today!

Register here.

Sustainable Community Design Leaders: Who we are, What we do
Tuesday, February 16th, 2021
3 - 4pm ET (12 - 1pm PT)

Description: Join this live webinar to learn about the brand-new Sustainable Community Design... Read more

I am working on a new community development in St. Paul that is striving to achieve net-zero energy. We are able to get there mathematically by using the extra generation on light industrial rooftops to offset medium-density housing energy use (all buildings are anticipated to have different, private owners). However, this puts us over... Read more

Hi Folks ,

Two fun and useful events to help us all do more in less time!!

1. DeCon Hackathon 4/12

These are sessions where the community comes together to 'crowdsource' standard construction details that are disassembly-friendly for a public detail library so that everyone can use it and start adapting those details in... Read more