Hello all, 

Our firm recently signed onto the Material Pledge and while there is no reporting requirements at this time we are wondering how other architectural firms are, or plan to, report projects. 

Thanks for any insight that can be shared!

-Dave

Welcome to the quiz portion of Resilient Design—Smarter Building for a Turbulent Future.

Learning Objectives
Upon completing this course, participants will be able to:


1. List three motivators for resilient design and at least three actions that address each motivator.
2. Explain why climate change isn't our... Read more

SDL Group -

Hi all!  After a brief hiatus from the group to move from New Orleans to Portland (OR), start a new job at ZGF Architects, buy a house, and  see my baby boy become a toddler (all in the past year!)---- I'm ready to plug back into the group.  Seeing folks at the ILFI conference re-energized me to reengage :)

So…..does... Read more

Hi All, 

My understanding is that SCL reporting is only for refrigerant use, or recharging for headquarters. I've asked our MEP contractor for a list of our 21 units, refrigerant use, and what quantity of refrigerants were used to charge equipment during installation or service.  

Is anyone tracking this for job sites?... Read more

Are you ready to share the story about your best projects?

AIA COTE Top Ten Awards is a great way to get recognition for your best work and the call for submissions for the 2024 cycle is now open!

The awards cycle has shifted, and the deadline for the 2024 awards is October 26.

So NOW is the time to pull together... Read more

Hi all,

We're seeing more interest and desire for outdoor work spaces, and as we consider the design implications around working outdoors, teams have been asking about wind comfort. We've tested Ingrid Cloud and now SimScale. I'm curious if anyone would recommend any other CFD tools that are geared toward architects? Also curious if... Read more

Dear All,

I'm happy to announce the Call for Speakers for our next Gulf Coast Green conference, which will take place June 1, 2018 at Rice University in Houston.  The theme is Resilience: Beyond Recovery.  (Harvey, you know).  We absolutely love to have SDL members at Gulf Coast Green, and I know there are several of you who specialize... Read more

Hi - We have some projects within reasonable reach of ILFI's Zero Carbon Certification, which will require purchasing some off-site renewable energy. As a State Building Code Council member, I'm also eyeing the Zero Code which we will seriously consider in the next 12 months; this also requires a purchase of off-site renewable energy. 

I... Read more

We are excited to open registration for the Sustainable Construction Leaders Summit 2019! This year’s Summit will take place Tuesday, Nov. 19 in Atlanta in conjunction with Greenbuild. The Summit agenda will be shaped by the steering committee and collective feedback from the group. The day will culminate in a networking event with members of... Read more

Hi all,

We are trying to encourage participation in take-back programs and using recyclable packaging with our vendors and I was wondering how we can add it to specifications. Does anyone have any examples on how we can add wording in specs about participation in take-back programs, using recyclable packaging and/or reducing non-... Read more

Hi,

There is a Blog section on the BIT User site. Will you have a blog post in time for launch? Or should we hide that section to begin with?

https://live-bituser.pantheonsite.io/blog

Andrea

Medium-density fiberboard (MDF), particleboard, and interior-grade plywood can emit formaldehyde, a known human carcinogen. Some materials  come from non-sustainable sources.

BuildingGreen-Approved Panels

Products meet California Air Resources Board (CARB) ultra-low emitting formaldehyde (ULEF) or no-added-... Read more

Ace Brockwell

In an effort to share expert knowledge on the topic of whole building LCA, we are continuing our expert guest webinar series, addressing the topic of steel on March 19th at 1PM EDT. Michael Gryniuk PE, with LeMessurier and SE 2050, will be joining us to share his strategies for reducing the embodied carbon of steel. This webinar is particularly... Read more

The Resilient Outcomes Working Group grew from a session at the 2020 Winter Summit in Gulf Shores AL, and we are still going strong.  We are currently focused on three primary objectives: 1) bringing awareness to resilient design through a presentation at the GreenBuild 2024 Resilience Summit (we'd love to see some peer network friends at our... Read more

https://www.usgbc.org/articles/us-green-building-council-celebrates-2021-class-leed-fellows

I'm sure you will see many familar names on the list - not the least of which is our fellow SMEPL:  Sarah Gudeman.

Congratulations, Sarah - well done!