Hi SD Leaders,

As you may be aware, this past April a group of manufacturers calling themselves the Living Product 50 responded to the letters that many of us sent about five years ago advocating for transparency in their product ingredients.  A copy of that letter can be reviewed about midway through the page at this link:  https://... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more

This is a bit off the thread of sustainable design leadership, but how much design and/or leadership can you get done without an adequate amount of caffeination?

We are looking for recommendations and advice on improving the sustainability of our breakrooms, particularly on the subject of beverage (mostly coffee, but also a fair amount... Read more

Hi all,

HOK has ~75 WELL APs whose credentials will expire in 6-12 months, so we're starting to look into a more robust CMP program.  Do you have great sources of health + wellbeing education, particularly WELL-specific CEUs, that you would recommend (emphasis on free or very low cost)?  We are currently using GBES, BuildingGreen, and... Read more

We are coordinating an effort to produce a "Building Reuse Practice Guide for Climate Action" for the AIA.  This is intended as a resource for architects working on major renovations and adaptive reuse, with a focus on reducing energy use, lower embodied carbon, electrification, and adapting to a changing climate. We are looking for around 5... Read more

Hi all, 

I'm excited to announce that LHB (my 250-person multidisciplinary firm located in Minnesota and Wisconsin) is hiring a full-time Regenerative Design Leader. I thought this might be helpful for those of you looking for example job descriptions for your own postings, or if you are looking to make a move (we do have an office in... Read more

All,

Some of my colleagues and I have been working to promote interest in mass timber construction for K-12 builidngs.  As part of that effort we redesigned a large high school using mass timber in lieu steel, and conducted a whole building life cycel assessment to measure the reduction in embodied carbon.  We also conducted a program-... Read more

Who all is implement 360-degree reviews as part of their employee review process?  Lake|Flato is thinking of implementing this and would like to talk to a few other firms who have experience they would be willing to share.  Please contact me if you'd be up for a short email discussion or phone call to discuss.  hholdridge@lakeflato.com

... Read more

BuildingGreen Approved, like its predecessor, GreenSpec, is an independent product evaluation service for BuildingGreen members. We offer an unbiased look at products: BuildingGreen does not accept any manufacturer fees for our evaluations. Here’s a quick tour of the platform and how to use it.

Fluid-applied roofing materials can be added to an existing roof to extend its life and provide reflective characteristics.

BuildingGreen-Approved Roofing

Products listed by BuildingGreen have VOC levels below 50 g/l and reflective surfaces to reduce heat gain.

Energy Star requires initial reflectance of 0.65 for low slopes... Read more

Hey SDL,

I'm curious if anybody out there has developed specification language requiring a certain level of airtightness (as assessed via one or a series of blower door tests) for a commercial project when it is not going for a Passive House certification and a blower door test is not required by code--basically, something in the... Read more

I am looking for examples of police stations and fire stations that are operating at an ENERGY STAR or better level.  Google searches have not provided much to go on - I found one net zero energy police station (Cincinnati Police District 3 West Side).  Curiously, Justice Facilities Review write ups do not include details about energy... Read more

A brief non-technical rant about OneClick LCA - from someone who is not actually USING the tool, but lobbying for its access.  Wondering if you all have better intel, or if it is just me.

We are working on a number of projects for which te teams are using OneClick LCA - for some cases it has a better international data set than others. ... Read more