Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hi all,

Are you looking for a senior level sustainable design position in Canada?  We’re hiring a sustainable design leader and senior sustainable design consultant with location options in Vancouver, Toronto, Edmonton, Calgary or remote (Canada only). https://dialogdesign.ca/careers/current-openings/

I joined DIALOG 10 months ago... Read more

Hi All,

I'm working on a LEED for Schools project under 2009, and received some amorphous comments back about our Mold Prevention Plan. We used the LEEDuser template as a guide, while also referencing the EPA document the credit is based around, but the reviewers feel we haven't provided proper metrics. The EPA plan is something like... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

I'm curious if anyone can share their strategy on indoor air quality for the return to office. Is this something that is prioritized at your firm from a wellbeing standpoint and with the current health crisis at hand? Lendlease is looking into options to safeguard our employees/occupants as we move back into the workplace and I'm researching... Read more

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

Hello Gurus,

I’m writing to share with you an effort a small group of lighting designers from the Boston area started which is now rolling into a large scale effort.  We’ve put together a Lighting Advocacy Letter to accelerate the sustainability of lighting products. Inspired by the AIA Materials Pledge, the letter is intended to... Read more

Welcome to the quiz portion of Chemical Transparency: The HPD Issue.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss why chemical transparency matters and answer common technical and practical questions regarding HPDs.
2. Offer solutions for the legitimate concerns... Read more

In order to successfully contribute to a LEED project, it is important to have an understanding of how the LEED process integrates within a typical design and construction schedule. Every new construction or renovation project, whether large or small, moves through certain project phases beginning with design development, design completion (... Read more

(posting here for Kira)

Sustainable Design Leaders:

Is your firm using the AIA COTE Top Ten Toolkit in some fashion? COTE would like to hear from you, especially if you are willing to share your story. 

Specifically, we'd like to share best practices and lessons about how it is working (with certain types of projects, at... Read more

This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Hi. Happy Monday! Will BG create the BIT-user intro video found on the landing page? Do we partner on it, or should Southface plan to provide it? Thanks.

Reaching out to the collective knowledge here.  With interest in circular economy and building reuse growing, is anyone leading the charge for the concept of building reuse as a tool for maintaining community identity?  Has anyone seen successful projects with this concept in mind?  I was just in a discussion with a bunch of SDLers, and while... Read more

I'm looking to change consultants. Let me know if you have worked with a 179D consultant that you would recommend.

Hi gang,

Following up on the recent Air Quality Design Jam at the summit, I’d like to round up the folks interested in supporting an Air Quality Working Group.

Didn’t attend the summit? No worries – everyone is welcome! We had a good group the other week and several of us want to continue the conversation.

The design jam... Read more

Pumpy Nullifidian

For those of you working in jurisdictions with both prescriptive and performance-based commercial energy code pathways, roughly what percentage of your projects are using the performance pathway? How do your project teams decide which pathway to follow?

In Minnesota we are seeing very few projects pursuing the performance pathway,... Read more