CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Vapor retarders are meant to protect our building assemblies from getting wet, but they can also slow drying, contributing to mold and structural degradation.

BuildingGreen-Approved Vapor Retarders

Currently not for sale, being updated and re-released in November 2021.

New Guide to Thermal Insulation Report

The BuildingGreen Guide to Insulation provides detailed guidance on insulation products and practices, including cost comparisons and detailed recommendations on what insulation to use, and what to avoid. It's a treasure... Read more

The BuildingGreen/GreenStep exam prep materials are... Read more

We just had a planning call for the tour, and I’m more convinced than before that: a) we picked a great location for this year’s Winter Summit and b) you won’t want to miss this tour!

Alabama’s Gulf State Park got a big infusion of funds from the BP Oil Spill (that’s an interesting story in itself), and now has some amazing new... Read more

Hi folks,

You may have seen this posted to the Green Gurus forum. Paula got some good responses from architects and engineers, but not so much from GCs so she asked me to follow up and post it here. Please reach out to her if you're willing to be included in these articles/reports. Thanks!

Hi! I’m working on two reports about... Read more

Hi everyone,

Join us for the webinar, "IRA Funding with a Tax Expert Part 2: Updates and  Clarifications" on Tuesday April 2nd at 3pm ET!

Register here and please feel free to invite anyone from your firms to join.

The great presenter from Energy Tax Savers, Jacob Goldman, is returning for a follow-up session for our... Read more

Welcome to the quiz portion of Introduction to Fitwel Certification: On-Demand Webcast.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Identify the different categories within Fitwel and the particular human health and wellness aspects.

2.  Describe the differences between Fitwel... Read more

Gather with the Changemakers in Sustainable Design

You are invited to join BuildingGreen and your peers for the Summit that has always delivered on driving our movement forward. Over three days of collaboration, workshops, learning, sharing, networking, and socializing, we’ll explore what Sustainability Leadership looks like in 2023 and... Read more

There seems to be a slight glitch in that it was posting Seonhee's picture (love Snoopy!) for the post that Duane sent in - is that correctable?

**Just noticed that you can click on the "Edit" tab on the post and correct (e.g. mis-spelled names (Sorry, Seonhee!).**

Hi MEP Leaders,

I wanted to remind you that our monthly call is today, August 10th, at 2pm ET! This was rescheduled from the usual time - the second Tuesday of the month - due to a BuildingGreen staff retreat. If you usually can't make the Tuesday time, this is a great opportunity to join the call!

Here is the agenda, and below is... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Graywater can be treated and used for irrigation or toilet flushing, reducing significant burdens on municipal drinking water and wastewater treatment systems.

BuildingGreen-Approved Graywater Products

BuildingGreen... Read more

Hey, everyone! Reaching out to share about the currently-under-development IEA Annex 89: Ways to Implement Net-zero Whole Life Carbon Buildings. The current committee is really the who's who of building LCA in Europe, but it does seem like it suffers from a lack of North American representation. The one North American on the committee, in fact... Read more

As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more

They do, seriously.  They are fine people with tons of information, and without them, all of us Architects would be, well, out of luck.

So, we first want to say THANK YOU to all of our contractor friends who took part in our Contractor Coffee Talk on Tuesday. THAT WAS AWESOME!

We learned things like:

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

Hi gurus,

Do any of you have preferred portable devices for indoor air quality monitoring? I know it's hard to find apples to apples, but ideally temperature, CO2, VOC, PM2.5, PM5 would be on the list. Mid-level accuracy - better than consumer, not as $ as IAQ professional level. Thanks!

Hi everyone - in doing a carbon footprint for our firm, does anyone know if buildings that we design as Architects considered scope 3 emissions, or are they beyond the boundary of emissions? LMN's buildings, despite best efforts, are cumulatively multiple orders of magnitude above our scope 1 and 2 emissions. We have never included these... Read more

First, there was Energy Use reductions

Then there was embodied carbon

Soon it will be refrigerant use/leakage calculations

…and much more

As coordinators and leaders of project teams, what does this look like for the practicing architect and our collaborators?

I have no idea. BUT I’m guessing someone is... Read more