Forum topic
We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”
I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.
The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more
Product Guide
Faucets with high flow rates waste water—not to mention the energy used to treat and deliver it to our buildings—and the additional water stresses our wastewater treatment systems.
Warnings Low-flow faucets may not be appropriate for every application. Where there are long pipe runs or large-diameter supply pipes, it can take longer for... Read moreForum topic
Dear Colleagues:
If you are short on time, here is the executive summary:
Time to make healthy trouble and sign a petition today to the WHO to urge them to recommend the implementation of best practice healthy air guidelines in light of the recent studies showing a direct link between the spread of COVID-19 through aerosol... Read more
Forum topic
What is the status of the roof insulation market regarding non-halogen containing polyiso boards? I know GAF and Atlas still have them. I thought JM had them as well, but seems to have taken them off the menu. Are there performance issues?
Forum topic
At the recent All Networks Workshop in Seattle, I listened with interest to some conversation about including sustainability goals, KPI's, critical materials lists, and other related topics on a G-sheet in the drawing set. This is something I had not previously considered, but would like to learn more about.
If you work for a design... Read more
Forum topic
As part of the Philadelphia AIA COTE, we have been proposing implementing sustainability in some fashion into the design awards with our chapter's design committee. I know that many of you have been down this road before, and wanted to get your feedback at a high level about what your local COTE is doing. Anyone who's interested, can you... Read more
Quiz
The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more
Forum topic
Has anyone had experience working with Hyper Metro (http://hypermetro.co/)? If so, did you find this company to provide value especially in dense urban environments where on-site segregation poses challenges to manage multiple C&D material streams on site? Hyper Metro claims to be able to provide rebates and to pay us for our trash.
Forum topic
Hi folks,
As you've no doubt heard from us by now (several times), in lieu of Summer Summits this year we're offering a combination of events this fall. Our series kicked off last week with a great Regional Mini-Summit in Boston. Regional events like this were in our plans before COVID blew everything up, so this one was a long-time... Read more
Forum topic
Hi Everyone,
As some of you know, I’ve been working on a new book, People, Planet, Design: A Practical Guide to Realizing Architecture's Potential and I’m happy to announce that it is finally available!
This book grew out of a decade of thinking about how sustainability fits within architectural practice. It explores the reasons... Read more
Forum topic
Hello Green Gurus, here's a reminder that this webinar is happening one week from today!
Register here.
Planning for Resilience in a Climate-Changed World
Thursday, February 11th, 2021
3 - 4pm ET (12 - 1pm PT)
Description: The world is focused on Covid 19 right now, but the pandemic is just a dress rehearsal for... Read more
Forum topic
Hello All,
I'm supporting a project that is pursuing Green Globes and trying to get familiar with its content. I'm hoping someone might have experience with the program and be able to provide direction toward products that have an OESR. From what I've read, this is a material ingredient disclosure type report, based on ASTM std. E3182-... Read more
Forum topic
Hello, All,
Does anyone have experience with cove.tool (https://covetool.com/)? Perhaps for those projects that may not get fully modeled, or as a tool to help set baselines? It came across our radar recently, and I'm wondering if the subscription might be worth a try.
Thanks!
Maria
Forum topic
Hello small firm Sustainable Design Leaders!
We are cancelling our call next week that had been scheduled for 2/13 @ 1pm. That same day, Thursday, BuildingGreen is hosting an all Peer Networks WEBINAR. Please consider participating with the sustainability leaders from all peer networks: Design Leaders, Construction Leaders, MEP Leaders... Read more
Quiz
Welcome to the quiz portion of Video: Eight Steps to Success with LEED-EBOM.
Learning Objectives
Upon completing this course, participants will be able to:
1. Describe the first steps project teams should take when considering LEED-Existing Buildings: O+M.
2. Understand the steps and timeline ofthe LEED-... Read more
Forum topic
Good Afternoon!
has anyone heard of this? the program focuses on healthcare construction but i think it would be good for all construction sites to have a certified individual. And for those of us that report to CDP, this would be a good risk management strategy to include.
https://greenadvantage.org/pcra-certificate-program... Read more