Hello Sustainable Design Leaders,

Mark your calendars for an exciting webinar next Wednesday, May 27th, at 2:30pm ET and REGISTER HERE!

Missing the Forest: How forest practices impact the carbon embodied in mass timber projects is a follow-up to last month’s conversation on embodied carbon and mass timber. The presenters will be... Read more

I was asked to share this with my network...

"For colleagues working with LCA data, during design, construction, or facility management proces, please help us understand how EPDs are useful in your processes by completing the survey below:"

https://www.linkedin.com/posts/ashrant-aryal-2354497a_qualtrics-survey-q...

Hi Everyone,

Please mark your calendars for next Tuesday, March 17th, 2020 3pm ET (Noon PT) for an SCL webcast with Mark Chen at Skanska and Emi LaFountain at Turner Construction on Quantifying Jobsite Carbon Emissions. 

Description:

Quantifying Jobsite Carbon Emissions w/ Turner and Skanska
The focus of embodied... Read more

Hello All,
Checking in on experience with Armstrong's Tectum E-N with NEOPOR Graphite polysytrene GPS rigid foam insulation core in roof panels for exposed structure?
BASF says that NEOPOR uses up to 30% less material than other rigid foam; it is greenguard gold cerified. 

Interesting that the NEOPOR increases in R-value as... Read more

Hi Gang, 

We are looking to implement the contractor commitment and are running into COVID-19 protocol barriers when looking at the Jobsite Wellness category specific to the soap as well as the food storage/eating areas on site. Anyone else run into this issue? 

-Kena 

Hi! We're putting together a pre-summit survey to collect input from everyone who's signed up for the Summit; we'll use that to prep the agenda for our get-together July 9-10.

Based on our last few phone calls, here's a list of topics on our radar. If there are others you'd like to see added to the survey, or if you have more thoughts... Read more

Hi All,

I just tried to post a minute ago but it said my connection was lost, so I'm starting over again. You may see two similar posts from me.

Alejandra and I started a document (attached) with ideas on how we can tackle some of the issues we are currently facing with zero waste, as a follow up to our conversation last Friday... Read more

Rotary Uninterruptible Power Units

Power interruptions and brief changes in voltage can damage electrical equipment, compromise computer data, shut down manufacturing, and endanger hospital patients. In the case of power outages, generators usually take over, but about 98% of all interruptions last less than ten seconds, and there is a... Read more

Welcome to the quiz portion of Exterior Paints: Long-Term Protection and Environmental Tradeoffs.

Learning Objectives
Upon completing this course, participants will be able to:


1. List the primary differences between alkyd and latex paints and stains and between wood, concrete, and metal primers.
2. Explain... Read more

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

I'm the Director of Sustainability at Columbia Construction.  We're headquartered in the Boston area and primarily work in the Northeast.  Along with the typical challenges of projects and evolving rating systems, I'm looking forward to learning and sharing strategies for corporate sustainability progress.

This past year I'm proud to... Read more

Hi,

There is a Blog section on the BIT User site. Will you have a blog post in time for launch? Or should we hide that section to begin with?

https://live-bituser.pantheonsite.io/blog

Andrea

Welcome to the quiz portion of the Wood, Forests, and Embodied Carbon Webinar!

Learning Objectives
Upon completing this course, participants will be able to:

1. Explain the complex relationship between forests and carbon, with an emphasis on how carbon releases from forestry affect the sustainability of buildings that... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

I have been asked to recommend folks to join the AIA’s Framework for Design Excellence.  The AIA Framework for Design Excellence is basically the top ten toolkit, that has been rebranded by the AIA and is forming the backbone of much of the policy that the AIA is currently setting.

From the AIA's website:

Our Sustainable Construction Leaders peer network famously developed the Contractor's Commitment.

Famous because it is the industry's only agreed-upon framework for systematically addressing the environmental and social impacts of construction activity.

Famous because it now has 27 signatories, collectively accounting for $49... Read more