Hi all, 

Following the SCL Summit back in November, the Waste Subgroup agreed to complete a Model Waste Management Plan to serve as a contractor commitment to reduce construction waste. I distributed the attached (very rough) draft back in Jan., and received some good feedback via forum comments. 

We would like to set up a call to... Read more

Welcome to the quiz portion of What You Need to Know About Concrete and Green Building.

Learning Objectives
Upon completing this course, participants will be able to:


1. Recognize concrete's environmental footprint and how to reduce the quantity of concrete used in buildings.
2. List the advantages and... Read more

Our Peer Networks offer a safe haven to you and other leaders where you can support one another and work together toward sustainable solutions that are intent on moving projects and the industry forward in the best possible ways.... Read more

Has anyone worked on a project installing a PowerNest system?  I just found out about it today and would love to get working information on it.  

Here's the link, in case its new to you as well. https://www.ibispower.eu/home

Thank you -

I've been seeing Armstrong's DC flexzone ceiling system at Greenbuild for many years. I'm working on a net zero project with LED lights and solar panels. In theory, the transmission losses in going from DC power from panels to AC for the building to DC for the lights would be eliminated. But does anyone actually have experience using this... Read more

Anyone know of tools/methodologies for estimating embodied carbon and carbon sequestration potential of individual green infrastructure projects (e.g. bioswale along bikeway)? I've seen tools for the larger scale (e.g. land use change) as well as specific to trees (e.g. i-Tree), but these don't fully meet my needs.

Thanks!

Hi all,

We are designing a mass timber building and are closing in on selecting our mass timber supplier.  One supplier is offering FSC wood and the other is offering PEFC.  I don't know enough about PEFC to make a clear recommendation to the client about how it compares to FSC.  I understand that PEFC endorsed SFI, so that concerns me... Read more

Hi SDL,

I'm heading to Greenbuild next week and one of my teammates who's not attending has asked me to look for expo hall vendors who are involved in Design for Freedom. He's starting up a new project that he thinks could be a good DFF pilot and wants to get some manufacturer contacts. Is there any kind of informal DFF meetup happening... Read more

Dear Green Gurus,

I both regret and am excited to tell you that I am leaving this group to pursue my next adventure.  I'm stepping down as Kirksey's Director of Sustainability, moving to Tucson, and starting my own business.  My business plan is to buy existing buildings, renovate them to net zero, and then sell or rent them.

I... Read more

Board insulation has good thermal performance ranging from about R-4 to R-8 and is used as an integral part of a building envelope’s continuous insulation system.

Because board insulation is used on the building exterior, it is not always subject to the same material health and emissions requirements as batt insulation used inside the... Read more

Hi folks,

We had a rich conversation in our monthly meeting last week. I've summarized the highlights below. Next call is July 11 at 2pm eastern. If it isn't already in your calendar, here's the Zoom link.

What’s on people’s minds?

Looking into high-temp water-source heat pumps for industrial applications. Transom and... Read more

I am diving back into Sefaira for the first time in a while, and the program still seems to be missing the ability to account for automatic daylight dimming in energy savings. Previously I had used an LPD reduction equivalent to emulate the savings automatic dimming would provide. Has anyone done a similar work-around? 

Hi all-

We are dabbling in developing an official research component of our firm. We have collaborated with a class at a local university and are looking for ways to take our research to a higher level. I'm curious how some of the other firms doing design or building technology research approach the process. For instance, do you have a... Read more

Practitioners interested in reducing the embodied carbon of buildings are likely now used to considering the impact of different materials, like mass timber or low-carbon concrete. Low-carbon construction, however, may be less familiar. 

Contractors are just... Read more

For those folks who are on our retrofit electrfication roadmap post-palooza-sub-sub-working group ;-) , I thought you might be interested in these three guides just released from BEI in collaboration with S. Winter Associates.

Here are the three Playbooks:

Welcome to the quiz portion of Can Commercial Kitchens Go Electric?

Learning Objectives
Upon completing this course, participants will be able to:


Understand why building electrification can be better for the environment and human health than use of fossil fuels, including natural gas.

List eight reasons... Read more

Hey Everyone! My firm is a part of the local Passive House group helping organize the local Humid Climate Conference on May 2nd - 3rd. I wanted to make a post in the chat for those interested to sign up.

The theme is "Barriers To Better Buildings" and it's going to be a really strong, humid climate focused conference. We've nearly got... Read more