Question for you all: there is this wonderful graph showing how we can shift mechanical and electrical dollars into envelope investments to make deep energy savings cost-neutral. Have you experienced this on a project?

1-minute or less survey! (two questions, more detail if you want)

https://docs.google.com/forms/d/e/... Read more

Hi (again) all,

Jacobs is looking to hire specifically for sustainability needs! We have a current job posting for a Senior Sustainability Specialist now up, and anticipate a similar posting soon for a mid-level person as well. Location for these would be in the Mountain or Pacific time zones, remote work is fine; other future... Read more

I am looking for case studies/trying to identify buildings using concrete mixes with upwards of 30% replacement of cement by SCMs.  I've been in conversations with some structural engineers who are interested in lowering embodied carbon in upcoming projects, but would like to see examples of where this level of replacement has been successfully... Read more

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

We have several projects that are small enough that we don't hire consultants to run energy models. I just received permission to do some training so that I can run these models myself. I am looking at doing this training on eQuest:

https://www.udemy.com/course/equest-energy-modelling-detailedtraining/?c...

I am thinking it would... Read more

Plug loads—the energy consumed by plugged-in devices—can use a substantial amount of the total energy in both residential and commercial buildings.

BuildingGreen-Approved Controls

BuildingGreen approves products that monitor and reduce electricity use for plugged-in electrical devices.

Plug Loads and Energy Conservation... Read more

We had a small group tour the Dell Seton Medical Center campus today, and a much larger group tour the new Austin Public Library. 

My favorite quote from the Medical Center tour, was about this project being the first private development on U of Texas property. "It took 58 separate legal agreements. We won a ULI award for making the... Read more

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

Hi Green Friends - I hesitated to post on April Fools, but wanted to get the link out for folks to share with their netowrks    I'll be teaching a workshop at the Pacific Energy Center on May 11 on Electrification Retrofits of Exisitng Non-Residential Buildings.  I'll be bulidng on the great work our sub-committee led by Allison has been... Read more

Hi,

I have a colleague doing research on PCM in several projects. For context in their report, they were wondering if this group has seen any recent increase in application of PCMs in recent years. Is it just in ceilings or other applications? If so, what products are being used? They were having difficulty finding manufacturers other... Read more

Per our discussion on today's SMEP call, it would be interesting to have a more in-depth discussion on Indoor Air Quality. Questions I have personally...

SDL

Glad to see some of you at the COTE event at our studio last week.

Has anybody heard of this company and technology? https://www.enverid.com

Thanks in advance, Zach

Zach Craun, WELL AP, LEED GA

Associate

COOKFOX ARCHITECTS, DPC

250 West 57th Street

New York, NY 10107

... Read more

This summit was pre-approved for 10 AIA HSW LUs and 10 GBCI CE hours.

Please complete the survey question to confirm your attendance and receive your CEUs.

By providing your credential numbers in your profile, you will enable us to automatically report these CEUs to the organization. Please first check your profile to be sure your... Read more

Hi friends, 

Before i forget, here is the checklist I mentioned yesterday that got such a positive response in our office - again it came about after i was asked (for the Nth time) to write a sustainability description for a concept proposal/ RFP that I was not a part of and frankly didn't have a lot going for it. So it's framed as "you... Read more

Wellness is key to sustainable design. As more and more clients understand the value of healthy built environments, designers need to understand the various wellness rating systems available, and which would meet the project's goals and needs.

WELL and Fitwel have emerged as the two leading wellness rating systems,... Read more

Welcome to the quiz portion of Deep Material Vetting (That Won't Chew Through Your Design Budget).

Learning Objectives
Upon completing this course, participants will be able to:


1. Align product vetting with goals that aim to mitigate occupant exposure and environmental toxicity.
2. Foster partnerships with... Read more