We are evaluating Dynamic Glass - and I have always been a bit timid to use. 

Any thoughts / experience on what we should be aware of?

Thanks!

Hello SCL peeps, 

Thank you to all the people who filled out our 2021 event survey. Your feedback did help us narrow down the options, but it was still inconclusive about whether there’s enough interest in doing an SCL-only Summit. 

To stay on schedule with our planning (and to make sure the event will pencil out financially), we... Read more

Hi All,

If you have 5 minutes, we would appreciate your input in the Google Spreadsheet (linked below).  If you only have 1 minute, feel free to reply to this forum post and list your the typical equipment vendors you spec on projects.  :)

We're asking each of you to enter your "Top 3" specified vendors for each of the products... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

This one-hour crash course will review the concepts and key facts within the WELL Building Standard that are covered most extensively on the WELL AP exam. By... Read more

Howdy all,

Following up on Emily's post (https://www.buildinggreen.com/forum/aia-2030-zero-tool-vs-cbecs-baseline) on AIA2030, the folks on the steering committee's monthly call thought it'd be a good idea to do a general call for feedback on reporting this year while the bangs and bruises are still fresh. The intent is to compile the... Read more

Sorry this is last minute but it just came to my mind to share this as I am looking forward to this roundtable which is happenging Wed, July27th from 12-1pm EST. 

The Built Environment Plus Women in Green Roundtable is hosting some amazing women in the industry who are working on DEI issues for a panel discussion.  The conversation... Read more

Hi folks,

Here's the next Peer Networks private webinar. As usual, it will be recorded and shared in the network if you can't make it in person:

Thursday, July 18, 2pm EDT (11am PDT)

The Center for Active Design (CfAD), operator of the Fitwel Certification System, recently launched Fitwel v2.1, which advances a vision where... Read more

Sheathing should be designed for durability, but some sheathing materials can be toxic or may contribute to moisture issues inside the building envelope.

BuildingGreen-Approved Sheathing

Sheathing approved by BuildingGreen contains recycled content, rapidly renewable materials, or otherwise provides exceptional performance, such... Read more

Team,

See this paper regarding outside air vs. filtration.

https://www.sciencedirect.com/science/article/pii/S0360132313002515

MERV-13 is a good way to get most benefits without a huge cost.

Best,
Luke Leung

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

Welcome to the quiz portion of Green Building Product Certifications: Getting What You Need.

Learning Objectives
Upon completing this course, participants will be able to:


1. Differentiate between a standard and a certification.
2. Describe "greenwashing" and list at least two ways to spot it.
3.... Read more

Hello Peer Network members,

I have some bittersweet news: I’ve accepted another job and will be leaving BuildingGreen. I’m excited to be the new Community Outreach Manager at Brattleboro VT’s Retreat Farm and to support their mission of connecting people to the land and to each other. I’ve learned so much from being part of this... Read more

Dear all,

On a major renovation where the wall R-value/U-value needs to be brought up to energy code, specifically a mass wall situation, does anyone have insights on how the situation is best dealt with? On the project in question for me, the continuous insulation might have to be added to the inside surface of the mass wall and there... Read more

I am wanting to take the pulse of this group on behalf of a manufacturer who has asked us a similar question.

The company in question makes wood products and has had FSC CoC for over a decade. Recently, they are encountering issues with sourcing FSC for about 50% of the wood species they offer. There just aren't FSC sources available.... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hi everyone,

Just a reminder to please fill out the SDL 2024 Events Attendance Poll by the end of next Monday, December 18th. Thank you so much to those who have filled it out already! :) 

-Amanda

Biophilic design features are not just aesthetically pleasing; researchers have found that patients heal faster, workers are more productive, and children learn better when more elements of nature are present.

And yet there are still very few projects developed today that inspire a connection to life and the natural world. Some people... Read more