We're looking to add a green wall to our existing offices in NYC. Can anyone please share any good product/vendor recommendations?

We were hoping to use Naava walls, but they seem to have retracted into Europe, as far as I can tell.

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Building Green is the longest continuous running green building publication in the world. Its originator, West River Communications, was founded in 1985 as “a company that would translate technical information on energy efficiency and other environmental topics for the public and building... Read more

Untreated rainwater leaving a developed site is effectively a chemical spill, laden with pollutants that include oil, sediment, heavy metals, nitrogen, and phosphorous. The heat carried by stormwater is also harmful to fish and other aquatic organisms.

BuildingGreen-Approved Systems

We approve systems that:

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more

Dear fellow SCL'ers,

Recently one of our members, Ryan Poole, sustainability leader at DPR, has been facing some personal challenges. His wife is 35 weeks pregnant and was diagnosed with a brain tumor. They have moved across country - from Colorado to South Carolina - to be closer to thier parents and their support system, but they can... Read more

Hey team,

We're working with some institutions in the midwest that are trying to understand what kind of partnerships they could build with architectural salvage enterprises as they demolish many buildings to elevate land uses. I'm not overly familiar with the midwest market. Does anyone have any good circular economy / architectural... Read more

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Hi, this is a somewhat niche/specific question - we are working on an all-electric school (middle and high school) that includes a chemistry lab. The lab was going to have portable sources for flame experiments, but there is concern that the portable sources would be unsafe for middle school students, so they are asking for a hard-pipe natural... Read more

Hi All,

I wanted to share an exciting opportinity with this esteemed group: Placetailor is seeking out a Mechanical Engineer to add to their growing team. They are located in Boston, MA and focus on Passive House, Low-energy Design, and they have for two years running meet the tenets of the AIA 2030 Commitment! This is an exciting place... Read more

Welcome to the quiz portion of Solar Thermal Hot Water, Heating, and Cooling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain active and passive; direct and indirect; and low-, medium-, and high-temperature solar thermal systems.
2. Distinguish between the three most... Read more

I am working on a new community development in St. Paul that is striving to achieve net-zero energy. We are able to get there mathematically by using the extra generation on light industrial rooftops to offset medium-density housing energy use (all buildings are anticipated to have different, private owners). However, this puts us over... Read more

So I was testing assigning a BIT Expert to a Best Practice and I am having trouble getting the profile image to appear.  

When I upload a profile picture, it appears on the standard profile page from "My Account" but when I navigate to the BIT Best Practice 01, the image does not show and it takes me to another profile page that does... Read more

Hi there Hive Mind! Hope everyone's doing well and staying cool in the heatwave all over.

An engineer on one of my projects reached out about contact switches for operable windows that are empowered to shut down the associated FCU in dormitory bedrooms when the window is open. This functionality allows the FCU to run at something like... Read more

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate