BuildingGreen Report

Forum topic

Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more

Forum topic

Hello Everyone,

We wanted to share the highlights and take-aways from the large firm Sustainable Design Leaders (SDL) 2020 Winter Summit at The Lodge at Gulf State Park, AL. Additionally, this was the first year we had a pre-summit workshop for the winter summit. Our amazing workshop facilitator, Julie Huffaker from Deeper Funner Change... Read more

Forum topic

I'm curious if anyone can share their strategy on indoor air quality for the return to office. Is this something that is prioritized at your firm from a wellbeing standpoint and with the current health crisis at hand? Lendlease is looking into options to safeguard our employees/occupants as we move back into the workplace and I'm researching... Read more

Forum topic

Hi All - as Environmental, Social and Governance (ESG) becomes increasingly prevalent, I'm trying to learn more about what types of requests for ESG-related information folks are actually receiving and what types of trainings on ESG would be most helpful.  Drilling down a bit, I'm curious as to how ESG data points are moving down the supply... Read more

Author

D.J. Greenspecher

Quiz

Welcome to the quiz portion of Video: Energy Reporting in LEED with MPR6.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Define the role of MPRs in achieving LEED certification
2. Describe MPR6 and the pathways for achievement
3. Answer MPR6 Frequently Asked Questions... Read more

Forum topic

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

Campus-wide Group

Forum topic

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

Forum topic

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more

Product Guide

Ground- and water-source heat pumps move refrigerant or water through the ground or a body of water for use as a heat source (for indoor heating) or heat sink (for indoor cooling).

BuildingGreen-Approved Heat Pumps

BuildingGreen approves:

super-efficient commercial systems residential ground- and water-source heat pumps that... Read more

Forum topic

It was great to see everyone who was able to join in the peer networks webinar and to be able to share a brief update on what the Defining and Measuring Resilient Outcomes working group has accomplished over the last year... and what we are looking forward to tackling in the coming year. 

I've both attached a copy of the deck here and... Read more

Forum topic

What sorts of boilerplate and legalese will we need on the BIT User site? For example:

Privacy policy Terms & conditions Disclaimer

I'm not saying you need any or all of those, but I'm just giving a heads-up in case you need to check with your legal advisor.

I can link to those documents from the site footer.

Forum topic

I'm looking to change consultants. Let me know if you have worked with a 179D consultant that you would recommend.

Forum topic

Hi all,

As discussed in our monthly meetings, we are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic. In a similar manner as the electrification letter by the SMEP... Read more

Forum topic

Curious if folks know of any resources on hempcrete, specific to durability.  We have a one-story carbon-neutral operational energy project where the design team and client have bought into the aesthetics and carbon-sequestering potential of hempcrete, and amazingly it is looking to be no more expensive than a more typical concrete wall... Read more