Hi all!

NESEA's BuildingEnergy Boston is happening March 28-29 at the Westin in Boston's Seaport. Would anyone like to meet up there? There are a few happy hour-like events we could meet at in the Trade show space or I'm open to other ideas! Let me know if you're interested. Here is more info: https://nesea.org/conference/buildingenergy-... Read more

Ali Flynn and Alejandra Arce Gomez are planning a breakout meeting for the Waste Managment Group for all interested. 

Please fill out the doodle poll below so that we can find a good time:

https://doodle.com/poll/qxd4zxrw9xzrxwc6

Ali and Alejandra have drafted an updated version of the Commitment for Waste (attached) after... Read more

In this live webinar on the sustainability of wood construction, we tap the expertise of leaders in the field and look into three main issues:

We're looking to expand our design performance group - let Peter or me know if you have someone to recommend to us! Here's the description. 

Hello Green Gurus,

We’re happy to see the first round of summit registrations rolling in! We’ve had lots of questions about specific topics for the sessions. As usual, the agenda will be based on topics that are top of mind for you.

Whether you are already registered or not, please fill out the Pre Summit-Palooza Survey to help us... Read more

Welcome to the quiz portion of How to Spot Greenwash--A BuildingGreen Webinar.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the characteristics of quality standards and certifications to help screen out greenwash.
2. Recognize strengths and weaknesses of... Read more

Typically made from petrochemicals, carpet and its adhesives can offgas and it is a challenge to recycle, increasing the chances of it being incinerated or disposed of in a landfill. And broadloom carpet can difficult to repair if damaged.

BuildingGreen approves modular carpet that demonstrate lower... Read more

Hi, all.

Has anyone used Unicel's Timber Curtain Wall System? It uses engineered glulam wood mullions on the inside with aluminum mullion caps / butt joints. Has anyone gotten close to using it, but couldn't get it procured for a particular reason? They note up to 72% more energy efficienct than a conventional aluminum curtain wall and... Read more

Hello Green Gurus,

Here is the information for October's Peer Networks Webinar, How to use the Building Environmental Justice Tool for your next project. We hope you will join us!

Register HERE

How to use the Building Environmental Justice Tool for your next project
Monday, October 24, 2022
2 - 3pm ET (11am -... Read more

Please share this info with any contacts you have that you think would be a good candidate for our Design Performance Coordinator position -- Thanks!

Design Performance Coordinator in San Antonio

Happy new year everyone!

My name is Vandita Mudgal, I am the first ever 'Sustainability Engineer (district)' for Hensel Phelps N. California district (covers Nor Cal and Pacific NW). As mentioned, this is the first ever sustainability position at Hensel Phelps, therefore I am developing a lot of processes and systems for our district... Read more

Greetings, SDL network - We are attempting to resolve an issue with how data center projects calculate baseline EUIs for the AIA 2030 Commitment and could use some help from this network. With projects that comply with code prescriptively (i.e. not energy modeled), we have found the default baseline assumptions within the DDx platform are not... Read more

Hi, curious if anyone in the group has considered using Fitwel in an existing (built) school project (K-12). 

Would be interested in hearing your experiences and if this tool is a good fit for this type of project.

Hi Everyone,

HKS is looking for an energy analyst & systems design engineer for our Dallas office. If you know anyone that might be interested and qualified for this position, please send them our way!

https://careers-hksinc.icims.com/jobs/2428/energy-analyst-%26-systems-design-engineer/job

Thanks,

Ellen... Read more

Does anyone share the same feeling of stagnation? We are supposed to hit 80% pEUI reduction now and working towards 90% mark, but I don’t see it happening for majority of our projects, even the “right” ones that we implemented integrative design process & iterative energy modeling. I am wondering whether anyone would be willing to share... Read more