Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more

Go to your profile, where you will find the TEAM MANAGEMENT section in the left side bar. Click on Team Members.

You can invite up to 9 more colleagues for a 10-person team to start their Premium Subscriber access through the Team.... Read more

Hi Sages,

As you may have seen in my message, the Peer Networks Member List is not very helpful to us (yet), because a person can only show up in one network. Many of us are also in SDL or other networks; there are many more of us than show up when you filter that list for "Sages."

Until we can get that fixed, we'll share the... Read more

Welcome to the quiz portion of Engineering a Wood Revolution

Learning Objectives
Upon completing this course, participants will be able to:


1. Compare engineered wood to steel and concrete; and describe how engineered wood offers better dimensional stability, less waste, and more consistent performance than... Read more

Hi folks,

Has your firm:

- hired a consultant to conduct firmwide bias training?

- revamped its hiring process using an antiracist lens?

- developed coaching circles / reading groups around racism/anti-racism? 

- instituted new support structures for staff development around inclusivity?

- some other... Read more

As announced in last week's SDL/SCL Winter Summit, I have been working with a group of regional AEC professionals, industry stakeholders, and the New Buildings Institute on two code proposals to the 2021 Seattle Building Code that limit the Global Warming Potential (GWP) of concrete & steel in buildings over 50,000 sf (see attached).  We ... Read more

Hi all, 

I'm looking for critical mass here. Do any of you have or know of clients who are requiring Just labeling for their consultants? I've heard that Google is asking this, and wondering who else might be on that course. Thanks! 

(posting here for Kira)

Sustainable Design Leaders:

Is your firm using the AIA COTE Top Ten Toolkit in some fashion? COTE would like to hear from you, especially if you are willing to share your story. 

Specifically, we'd like to share best practices and lessons about how it is working (with certain types of projects, at... Read more

Hi. Happy Monday! Will BG create the BIT-user intro video found on the landing page? Do we partner on it, or should Southface plan to provide it? Thanks.

I am getting started on a research project to evaluate the feasibility, costs, and benefits of using phase change material (PCM) to passively regulate temperature in Minnesota buildings. If anyone has experience designing with PCM, installing PCM, or occupying buildings with PCM, can you share any lessons learned that would be relevant as... Read more

As we begin to look into Scope 3 emissions reduction strategies, it's important to understand ways to reduce tranportation emissions to project sites. Is anyone aware of best practices or programs for contractor carpooling to jobsites? I know many of my colleagues travel to work together in one vehicle because of parking limitations, however,... Read more

Hi all - I've heard from a few of you that you are interested in doing a book club or other internal education based on the Path to Zero Carbon. If you would like the word docs or pdfs of each of the 16 posts, let me konw and I'll send them to you.

I'd also like to know of those who are using it how it's going and what you're finding... Read more

Hello Sustainable Design Leaders,

On October 5th a number of us gathered for the Fall 2021 SDL Virtual Summit and the BuildingGreen team is happy to now share with you all the event report here! 

This report can be shared publicly. If you think someone would like to see it, such as firm leadership or prospective Peer Networks... Read more

Dear SDL: I'm writing to urge you to promote project submittals in your firm and region to the 2018 AIA COTE Top Ten  (TT) Award. The submittal deadline is 5PM EST  January 17, 2018 - coming right up!  The TT awards are one of the most recognized design awards for the general public and receive wide circulation through mainstream media.   AIA... Read more

Jason F. McLennan

I took a first pass at content for the Energy Audit best practice, see the uploaded file. 

Hi all,

As discussed in our monthly meetings, we are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic. In a similar manner as the electrification letter by the SMEP... Read more

Hey there hive mind,

Anyone have any CxAs in the Bay Area that they'd particularly recommend? I have a project in need.

Aley