All - 

We have corporate clients that are starting to request antimicrobials in response to Covid-19. I assume we are not the only ones seeing an increase in these requests. Knowing that the evidence supporting antimicrobials has limited to no efficacy, how are you approaching these conversations? We want to continue to advise based on... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Welcome to the quiz portion of Is Wood Construction Green? A Look at the Issues.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Determine what distinguishes wood products sourced from Forest Stewardship Council-certified forests, and why these products improve the environmental impact of... Read more

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more

Hello Green Gurus.

I've been looking into EPDs lately and ran across a few companies with Product Envionmental Profiles (PEPs) which they say are also known as EPDs. Does anyone have any experience with PEPs or know if they actually are EPDs? They reference ISO standards 14040 and 14044 in the writing and ISO 14025 in the list of... Read more

Hello - Other than hiring an acoustic consultant, I am wondering what in-house tools you are using internally at the design stage for modelling acoustic performance? 

Thanks, Mona

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Imagine folks have seen this, but thought it was worth bringing up: this study which shows the great need to build new renewable infrastructure to support electrification.

I've been in a few discussions with folks where we've discussed how electrification is objectively a good goal, but are we passing carbon from one source to another?... Read more

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more

Hello everyone,

Here's a reminder that our next monthly call will be taking place next Tuesday, October 8th at 2:00pm EST.

Please feel free to join us!

Join Zoom Meeting - I double-checked this link and it is correct!

https://zoom.us/j/248664490

One tap mobile
+16699006833,,248664490# US (San Jose)... Read more

Welcome to the quiz portion of Full-Blown Energy Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the role of the energy modeler and how each energy model opens an informed discussion between the entire project team about the interactions between architectural and... Read more

I am excited to share with you the final draft of the letter back to LP50 manufacturers.  The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year.  For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum.  When we posted the... Read more

Greetings AEC Sustainability Leaders -

This is an update on where we stand with the BBB letter. In addition to posting this to the AEC SDL (Green Gurus) Forum, we are sending the same message to all current signatories by email to make sure everyone is notified. Apologies for putting two items in your inboxes!

First, please read... Read more

Zero Tool has an expired certificate and isn't functioning. https://zerotool.org/zerotool/

I've emailed info@architecture2030.org but nothing yet. Anyone have any suggestions for contacting the administrators?

Thanks,

Tiffany Broyles Yost

GBBN

Hi folks,

The team at Open Architecture Collaborative Canada (website under construction) are developing a remote learning experience to address the lack of meaningful practice of design for social impact in the built environment-related design and planning fields. They’ve together a pretty detailed survey to help guide the development... Read more