Hi all, 

The San Francisco Department of the Environment is hoping to gather info from designers and specifiers about construction surplus materials. Their survey is 8 questions total and not limited to those in the SF area. 

Pasting info below if you have a chance to participate! 

Calling Designers and Specifiers:

... Read more

Nice brief article on how to talk to clients about materials transparency. It was the right level of information to send out to the office at large. Kudos to Lona and Ralph for your contribution.

https://www.aia.org/articles/210821-how-to-talk-to-clients-about-materials-tran

Alena Jumplot

Hello SCL,

We've heard you ask for more ways to connect with your SCL peers. So, we are happy to announce that we will now be holding bi-monthly calls where the entire SCL network is invited. These calls will be limted to SCL members (with the exception of guest speakers) so please don't share the information with colleagues. 

The... Read more

Has anyone come across any (embodied) carbon emissions calculator for water?  Perhaps per region/state?  

Thanks in advance!

The current Stantec/BuildingGreen featured topic is Resilient Design. Read on to learn the essentials, and then dive deep to earn CEUS.

Also see the Material Health featured topic, and also a survey of topics trending in Stantec’s regions.... Read more

Hope I'm posting this in the right place.  I have a client who's interested in estimating the embodied carbon of multiple buildings (primarily apartment buildings) they own and operate.  Not sure if I'll have access to drawings or area takeoffs of materials for their buildings.  How would you approach this?  Would appreciate input on resources... Read more

Hi! Just saw this White House press release stating that federal suppliers will need to report on scope 1 & 2, and relevant scope 3 emissions and climate-related financial risks as well as set science-based emission reduction targets. The cutoff for disclosure requirements is $50m in federal contracts. Curious whether this affects any... Read more

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

Hello,

We are having a discussion / a bit of a debate in our office about the merits and sustainability of different roofing materials. Our current standard is to use a PVC membrane, which we all know is highly toxic. TPO is an obvious alternative that is less toxic, but it has some performance concerns and can often lead to leaking (not... Read more

Welcome to the quiz portion of When Passive House Goes Big!

Learning Objectives
Upon completing this course, participants will be able to:


Evaluate the main barriers to achieving the Passive House Standard on a large, urban project.

Identify design strategies for successfully and cost-effectively achieving the... Read more

In looking for ways to reduce jobsite waste and lower our carbon emissions, I'm working on a business plan for centralized procurement, in lieu of individual project purchasing their own tools, PPE, & consumables.  I'm curious as to how many other GC's on here use (or have used) a central purchasing process and if you have any pros/cons... Read more

Hello SDL Leaders,

Over the past month, I have been working with ILFI to navigate the question of residuals in LBC compliant products vs. products reporting for a Declare label.

Through our conversations, it came to light that ILFI considers the LBC Red List threshold to be 10,000 ppm, rather than the 100 ppm written into the... Read more

Welcome to the quiz portion of Integrated Design Meets the Real World.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the integrated design process and describe what makes it different from the conventional design process.
2. Describe the charrette process and list... Read more

Products & Materials Specialist Brent Ehrlich excels at deep, unbiased, and nuanced technical research on the health and environmental impacts of green building products and materials. Some areas of focus include:

product and material constituents, including their risks

product certifications

third-party product... Read more

Are your clients asking you about wellness? You’re not alone. Healthy interiors and wellbeing are the trending buzzwords of sustainable design. Lighting design for circadian rhythm and water filtration methods might be on the... Read more

Hello AEC Sustainability Leaders (aka the Green Gurus)!

As we continue to promote and expand the use of mass timber on our projects, it is becoming increasingly important that we learn more about the spectrum of impacts that this material selection is having on the forests and communities from which we’re sourcing our wood fiber…both... Read more