Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more

Hello Green Gurus,

A close colleague of ours, Frances Yang of Arup, is distributing a survey developed in partnership with the Healthy Building Network (HBN).

The survey asks for which product categories you need more health information. Answers will help inform which product categories HBN next incorporates into its HomeFree and... Read more

I'm looking to compile an outdoor weather station for a local project, and we'd like to add local outdoor CO2 information to our data. I usually work with Onset HOBO products, but they don't offer an outdoor CO2 sensor. Their weather stations can take data from any CO2 sensor with an analog output - does anyone have any suggestions?

Hi All,

Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.

Thanks for any and all experiences!
Misha

Under a high carbon scenario, most of North America will be 2 degrees C hotter by 2050. Meantime, we're designing buildings that will still be around in 2050, to codes that don't yet factor in chronic risks associated with climate change. I want to explain these risks to my colleagues; I'm hoping some of our green gurus can help answer the... Read more

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Greetings Gurus, following the AIA COTE Design for Economy concept, does anyone have a resource for a list of building efficiency ratio "targets" by space type? I've always struggled with this initiative. 

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Stick-framed walls are labor intensive and have to be sealed and insulated in the field, where conditions are not ideal; this can lead to poor thermal performance.

BuildingGreen-Approved Structural... Read more

Hello Green Gurus,

We’re happy to see the first round of summit registrations rolling in! We’ve had lots of questions about specific topics for the sessions. As usual, the agenda will be based on topics that are top of mind for you.

Whether you are already registered or not, please fill out the Pre Summit-Palooza Survey to help us... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

Please share this info with any contacts you have that you think would be a good candidate for our Design Performance Coordinator position -- Thanks!

Design Performance Coordinator in San Antonio

Has anyone had any success with achieving the LEED Building Envelope commissioning points with an alternative compliance path using the requirements of the PHIUS verifier? It seems like an unnecessary duplication to ask the client to pay for a BECx agent and a Passive House verifier. Or am I missing something? I can't find any LEED... Read more

Hi! I'm writing a short news piece on WELL v2 and looking for someone very familiar with the existing and v2 standards to interview about the changes. If you meet that description and would like to go on the record with your thoughts, please reply to me directly at paula@buildinggreen.com. Thanks!

Hi all - I've heard from a few of you that you are interested in doing a book club or other internal education based on the Path to Zero Carbon. If you would like the word docs or pdfs of each of the 16 posts, let me konw and I'll send them to you.

I'd also like to know of those who are using it how it's going and what you're finding... Read more