The High Performance Buildings Database (HPB) provides case studies of projects ranging from homes and commercial interiors to large buildings and even whole campuses and neighborhoods. These may be certified green projects, or simply projects that have one or more notable environmental features. We review each published case study to focus on... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Engineered wood efficiently utilizes fast-growing, small-diameter trees.

When sourced from responsibly managed forests, engineered wood can store carbon that would otherwise enter the atmosphere, and can replace high-embodied-carbon concrete and steel in some structural applications.

Engineered wood products can also provide a... Read more

All,

The current version of the program manual includes ID numbers for the best practices, as shown below. I know we want to keep a quick reference number or ID, but though it would be worth asking if we want to use the below, reorder them in some way, or use a different kind of ID. Opinions?

Thanks,
Jenny

--------... Read more

Hey All,

I just received this from AIA MA. How fantastic would it to have a bunch of Green Gurus on the ICC Development Team! Is anyone on here already on it?

From AIA MA:
The International Code Council (ICC) is now accepting applications to serve on the Code Development Committees to develop the 2024 editions of the... Read more

Hi everyone,

I’d like to invite you to join this Friday’s webinar hosted by the Embodied Carbon Network: Using Whole Building LCA to Reduce Embodied Carbon within LEED and Beyond, and to follow up with a tool that I presented at this summer’s Architecture SDL summit, which ZGF has now upgraded and made free to the industry at large.... Read more

Hello SDL!

Has anyone set "Ecosystem Benefits/Service" targets for an individual project or for all their projects? I was previously against the idea of even measuring ecosystem benefits but I've had my mind changed in recent months!

Currently we want to set a target for every project to: "Improve ecosystem benefits on every site... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hello all,

Does anyone know of any Rebate Program for either induction cooking equipment or kitchen electrification (new or existing)? Looking for any local or state or even federal programs (outside of California) that incentivize designing/building/retrofitting towards an all electric kitchen for any program type (institutional, single... Read more

Hi SCL,

It's my first time posting in the SCL group, as a somewhat new member. I'm grateful for any input you can provide to me!

My company, Nibbi Brothers, is currently brainstorming how to roll out an EV incentive program to employees. We recently polled our staff to get a general idea of where they stood with EV in terms of... Read more

Welcome to the quiz portion of Certified Wood: How SFI Compares to FSC.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe how forestry standards engage with pesticide use, protection of old growth forests and forest biota, and prevention of deforestation.
2. Discuss... Read more

Good morning all,

I'm new to the forum and I am really happy to be here. For the last year or so, I have been working to advance high performance design at Flad, grappling with so many of the issues discussed in this forum. Especially in the context of recent times, it feels really wonderful to join a group of people dedicated to helping... Read more

All,

I'm looking for a quick methodology to estimate GHG emissions from refrigerants on a per SF basis. Are there any benchmark studies or quick calculators similar to the embodied carbon study? https://carbonleadershipforum.org/embodied-carbon-benchmark-study-1/

Thanks,

Josh

A colleague of mine from another firm is seeking a good sustainability consultant in North Carolina. I haven't done work in that part of the country so I'm wondering who you all would recommend.

Thanks,

Carolyn Day

When BuildingGreen started publication in 1992, simply finding building products designed with environmental benefits in mind was a big challenge. 

In the years since we’ve seen rapid advances in green building materials and products, and manufacturers are beginning to take topics such as embodied carbon and social justice concerns—... Read more

Hello all,

We are looking at ways we can use our specs to reduce toxicity in projects and one step towards that goal may be to require RoHS compliant lighting, switches, alarms, meters, etc., as required by the Small Electrical Components exception in the Living Building Challenge. Based on LBC projects I have been involved with, it... Read more