Forum topic
Hi folks,
Here's a neat resource that just showed up. Pages 5-7 list exactly what kinds of activities could be covered by new federal funds, and what part of the legislation relates to each activity...
From USGBC:
With the passage of the American Rescue Plan Act, the Federal government has now approved $176 billion for K-12... Read more
Forum topic
Hi All,
We are trying to make a case for hiring a full time sustainability specialist in our firm, and one of the arguments we want to use is that the ratio of sustainability specialists vs the ratio of full time employees in our company is quite low. That being said, I want to have an understanding of where other firms stand with this... Read more
Forum topic
Hi Sages,
Thanks to those who filled out the survey and helped set our agenda for Monday's meeting. We know that this time doesn't work for everyone (no time could, of course), so we'll be alternating times each month. The April meeting will be Thursday, 4/11 at 3:00 eastern.
The agenda is here. It also has the Zoom link (in case... Read more
Forum topic
I am excited to share with you the final draft of the letter back to LP50 manufacturers. The LP50 manufacturers sent their “Closing the Loop on Product Transparency” to design firms earlier this year. For more background information, please check out Chris Hellstern's original August 20th post on this Green Gurus forum. When we posted the... Read more
Forum topic
I was talking to Nadav recently about job posting opportunities through Building Green and/or through the Peer network. He shared this topic has been discussed in the past, and thought I should send a question out to the network. I am guessing many of you are looking for talent right now too? Wouldn't it be cool to know people of have been... Read more
Forum topic
I looked through the forums and was surprised to see that from what I can tell this 2018 article from Yale I'm going to share here has not been discussed previously. It basically says that FSC is not trustworthy, ineffective, and greenwashed, as critiqued by the likes of Greenpeace and others.
I would like to hear from someone in the... Read more
Product Guide
Typically made from petrochemicals, carpet and its adhesives can offgas. It is also a challenge to recycle them, increasing the chances that it will be incinerated or disposed of in a landfill. Because carpet has a limited lifespan, its life-cycle performance is key.
BuildingGreen recommends modular carpet that demonstrates lower life-... Read more
Forum topic
The AIA just announced the 2019 Young Architect Award Winners and our own Julie Hiromoto is one of the recipients. Just wanted to say "CONGRATS JULIE!" Well done!
https://www.aia.org/resources/6099220-2019-aia-awards---young-architects?utm_source=RealMagnet&utm_medium=email&utm_term=30134332--a3911d92-2589-4799-aed4-... Read more
Product Guide
Exterior shade or screening devices are generally much more effective at reducing solar heat gain than their interior counterparts.
BuildingGreen-Approved Shading
BuildingGreen approves exterior window and glazing attachments that reduce solar heat gain and glare or redirect daylight, providing important energy benefits while... Read more
Forum topic
Hi all --
We have a national restaurant client who is looking to source furniture (both indoor and outdoor) made with a minimum of 40% salvaged/recycled material, and they're very interested in finding a vendor that's woman- and/or minority-owned or that would qualify as a "disadvantaged organization" (their terminology). They would... Read more
Forum topic
Hi all,
We are in the process of pursuing the Integrative Process for Health Promotion pilot credit on a project. Has anyone been through the process? What did you learn? How did it change/inform your design? Would you do it again?
Thanks!
Michelle
Forum topic
I'm teaching a LEED GA study group and was rambling on the differences between CIR and precident-setting LEED Interpretation (that gets posted in the addenda library and all). Then I went onto LEED Online and was showing how those are submitted... but can't actually figure out how a LEED Interpretation would be submitted. Has anyone done this... Read more
Forum topic
Hi - we're working with the University of California Office of the President to put together low-carbon case studies. The two types we are looking for now include 1) a low-carbon TI (not a full building gut/renovation), and 2) any that involve the circular economy (in this case not just building reuse but product reuse) which could include... Read more
Reports, Courses, Study Guides, Live Webinars
Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?
This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more
Author
RoseAnn’s role at BuildingGreen as Peer Networks Manager focuses on Peer Networks projects and planning events, including annual Peer Network Summits.
Prior to BuildingGreen, RoseAnn worked in the nonprofit sector in customer-service based roles which allowed her to reconnect with her local community soon after earning her... Read more
Quiz
Welcome to the quiz portion of Building as an Organism: Understanding the Integrative Process Credit in LEED v4 Projects (recorded webcast)
Learning Objectives
Upon completing this course, participants will be able to:
1. Explain why integrative design is the key to cost-effective, high performance green buildings and LEED... Read more
Forum topic
Hello Green Gurus,
Here’s a reminder that our first Show & Tell for 2021 is happening next week! Monday, February 1st from 7-8pm ET and Tuesday, February 2nd from 4-5pm ET, come see your peers from all networks present for five minutes each on a variety of topics relating to their work.
This event is connected with the Summit-... Read more
Forum topic
Our specification team is currently piloting and testing new software to replace E-specs without an easy favorite, and would really love to know what other firms are using.
First question - what software does your firm use for specifications and why?
Second question - would you/your specifier be willing to chat with ours about it... Read more