Within the confines of the BuildingGreen safe space, I wanted to share the Forced Labor in the Building Material Supply Chain Mitigation Framework I shared at the 3/1 First Friday Fika. The intent is for this document to become public, but we are working through some permissions and final editing logistics. The project was collaborative... Read more

THIS WEBINAR REGISTRATION IS CLOSED.

Point: Green building is all about the environment—not social justice.

Counterpoint: The green building movement must ensure that the benefits... Read more

Welcome to the quiz portion of Five Reasons to Be Optimistic About Solar Energy!

Learning Objectives
Upon completing this course, participants will be able to:


Describe three ways how PV decreases environmental impact while increasing sustainability and health measures for communities.

Discuss PV life-cycle... Read more

Friends, I reviewed the firm's 2019 AIA 2030 data with a Principal, having organized the data in such a way that we could manipulate it. I included the average EUI and weighted EUI, since the latter gives a truer picture of where we are as a studio. In the past, the assumption was we would raise all boats with efforts to improve our practice in... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

Do you have the authority to start using only EVs in your renderings?  Let’s normalize and accelerate this change!

https://en.wikipedia.org/wiki/List_of_production_battery_electric_vehicles

Why are we showing gas cars in renderings of our green buildings?

Dear all,

For a specific existing building application, we are looking for a half inch insulating glazing unit, preferably with low-e coating. Based on my research, 5/8" seems to be doable (1/8" glass + 3/8" air gap + 1/8" glass) but I'm yet to find a viable 1/2" solution. Have you come across any on your projects? Thanks for your... Read more

Hi folks,

Oregon’s ZERO Coalition is looking for responses to the question below on local policy for electrification, and I thought tapping this group would be helpful.

Are you aware of any local governments outside of Oregon that are promoting or enforcing electrification?

Hi everyone -
Some of you already have heard some or all of this news, but I thought I'd share today's press release with the whole group.
The headline is: 
SERA is VERY excited to announce that David Johnson, formerly the managing partner of Bill McDonough's San Francisco office, is now heading up SERA's bay area office.... Read more

We've been doing some work gathering actual energy data on our recent projects. (In January we actually issued a report on 21 public buildings ). 

One of the biggest issues is getting access to the actual data - many clients don't want to share. 

Has anyone crafted proposal or contract language allowing/requiring design team... Read more

As some of you know, BuildingEase is the first (FREE) platform focused on building products that combines a workflow tool, waste exchange and marketplace (yes, you actually buy it all right from the site!).

The platform saves tons of hours, major headaches and streamlines workflow within a firm and across a team.

We are going to... Read more

The Sustainable Design Leaders group has had awesome, inspiring Summits for ten years now—and there is so much more we can do can to make it a thriving, essential year-round community. To do that we have to extend the trusted “safe space” of the Summits into our online conversations.

And other groups are just getting started on a... Read more

We are working on a tenant improvement and want to determine the embodied carbon on bookshelves, product display cases, and desks. Initially finding that Tally is not reading furniture, casework, or fixture families. Are there any tips and tricks you have found to be successful for modeling or defining FFE items in Revit and quantifying... Read more

Hi, folks! Posting on behalf of an individual outside of the networks. Are you seeking a sustainability and materials specialist in-house? This candidate great qualifications, including:

The Minnesota CLF chapter’s Specification Subgroup (myself, Andy Marolt/Ryan Companies, Laura Eder/ESG, Java Nyamjav/MSR Design, with input from Annie Perkins/SFI) recently collaborated on a draft set of specification templates incorporating embodied carbon requirements into product performance and action submittals. This work builds on sample... Read more

Hi all,

We’re thrilled to share that registration is now open for our All-Networks Workshop on Integrated Design + Delivery from the Inside Out! The workshop will be held on July 15th at Miller Hull’s Seattle office, right before the Summer 2024 SDL Summit. Register now before it fills up, and please feel free to email me with any... Read more