THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Live webinar approved for 1 AIA LU and 1 GBCI CE hour. Each person intending to earn CEU credits must purchase their own seat.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than... Read more

We have another great class of COTE Top Ten winners—congratulations to all of you with recognized projects. Join us on May 10 at 2:00 pm Eastern time for an inside peak at many of this year’s winners, along with insights from jurors. CLICK HERE TO REGISTER.

To keep things open and honest we won’t be recording this session. This “safe... Read more

Some of you are aware of my ongoing saga of off-site renewable energy and a LEED certification we are pursuing. The short version is that there is a new-construction corporate headquarters office building (Building #2 on the attached graphic). This building is pursuing LEED certification. 

The company also just installed a 1 MW... Read more

We are in the process of working with our ops people to figure out billability targets for my team. Something that may be useful is the firm survey that BG conducts before each retreat (See attached image). These are great, but it varies depending on which firms attend the retreat. Its also hard to tell (in some cases) which green dot is... Read more

Figured I'd throw out this topic to the hive mind!

We are working on a project in the Midwest that involves taking down and replacing an 100-ish-year-old brick building. We are hoping to find a way to salvage and reuse some of this brick in new construction. I'd love to do an LCA comparison showing the benefits of salvaging the brick vs... Read more

Have any of you heard of anyone ever using phase change material (PCM) "movable partitions" as a resiliency strategy to mitigate indoor overheating during a heat wave in passive buildings? You'd keep them stored in a basement or cool room, and deploy them into habitable spaces during the heat wave to keep the space cooler than the exterior... Read more

Friends, I reviewed the firm's 2019 AIA 2030 data with a Principal, having organized the data in such a way that we could manipulate it. I included the average EUI and weighted EUI, since the latter gives a truer picture of where we are as a studio. In the past, the assumption was we would raise all boats with efforts to improve our practice in... Read more

We've been doing some work gathering actual energy data on our recent projects. (In January we actually issued a report on 21 public buildings ). 

One of the biggest issues is getting access to the actual data - many clients don't want to share. 

Has anyone crafted proposal or contract language allowing/requiring design team... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Just an FYI that BG's web team is planning on attending your meeting at 1:00 EDT. We will need information on how to join since the info in the invite didn't work last time.

See you all then.

Hello! I just joined the SAL group and am thrilled to be a part of this amazing network! I am an architect and an educator and now run my own sustainable consulting practice in the Boston area. Having previously led the sustainability efforts at several of Boston’s large architecture and design firms, I made the exciting (and scary) leap in... Read more

Welcome to the quiz portion of Boost Happiness and Save Energy with Adaptive Thermal Comfort!

Learning Objectives
Upon completing this course, participants will be able to:


Define “adaptive thermal comfort” and explain how it can contribute to occupant health and satisfaction.

Compare the adaptive comfort model... Read more

Kristen Fritsch, in the thread about ipe wood, asked about resources comparing the carbon footprint of transporting building materials vs the transport mode.  There are people who spend their lives on this topic that I won't presume to speak for, but I'll share a few observations:

Even though freight transport is something like 7% of... Read more

Hi Folks - sorry for the late notice, but I just heard about this two days ago and needed to get confirmation that I could share the request with htis group.

The opportunity is for business leaders in energy, efficiency, construction and design (i.e. all of us!) -

As you know, the flow of the historic federal infrastructure and... Read more

Successfully managing the LEED documentation process requires specific knowledge, tools and skills that are not covered in the LEED Reference Manual. This condensed, online training is based on the LEED Project Management course that GreenStep developed and teaches through the University of California–Berkeley. As part of this interactive... Read more

Peeps, in case you haven't gotten the email blasts--the AIA wants YOU! Now is the time to throw your hat into the ring for volunteering on the following committees/groups: 

HGA is collaborating with the University of Minnesota Climate Adaptation Partnership (MCAP) to research how the AE industry is currently using climate projection data, and what they need in order to grow their use of data. MCAP is currently producing a set of dynamical downscaled climate projections for the state of Minnesota and unlike other... Read more