I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

We are trying to figure out how we are going to meet the LEED Credit for Building Life Cycle Impact Reduction for the first time.

One approach we're trying out: We're taking the results of our Tally model and looking at potential reductions from low-carbon concrete. However, the problem I am encountering is that when I take some of our... Read more

Hi folks,

We often hear from you with a suggestion of someone who would be great for the network, and a question about how to refer them. We've now made that easy, with three steps laid out in an Outreach Toolkit that's posted in the left margin of the Member Directory.

So, if you're thinking of someone to invite or come across... Read more

Metal windows are used in commercial building because of their durability, low maintenance, and ability to handle wind loads.

BuildingGreen-Approved Windows

Metal windows must achieve an NFRC-certified unit U-factor of 0.20 or lower to be approved by BuildingGreen.

Manufacturers also must demonstrate that their highest-... Read more

Welcome to the quiz portion of Full-Blown Energy Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


 

1. Explain the role of the energy modeler and how each energy model opens an informed discussion between the entire project team about the interactions between architectural and... Read more

All--

I haven't been part of this group in a while, but I'm excited to have rejoined recently. Some of you know that I joined HMC last year as Chief Impact Officer. I oversee design, sustainability, research, and communications for the firm, which has 300 people in 6 offices in California. We were founded in 1940 with a mission to serve... Read more

Hey Team,

I'm in a Living Future session where a number of manufacturers are talking about the low uptake they're seeing in their take back programs. Contractor friends... What barriers (if any) are you running into in using take back programs? How might we as architects help increase utilization of these programs?

Aley

Opal Mao Mannella-Durante

I am thrilled to announce that our own supreme Green Guru has been elevated to the College of Fellows!  Congratulations Pauline!

Announcements are being made today so don't be shy folks - please share the good news here.

Thank you for your interest in BuildingGreen

You will hear back from our customer support team in the next 24-48 hours.

Continue to home page »

Folks,

In case any of you enjoy the Phoenix weather, I wanted you to be sure to know that our company, Sundt, which is headquartered here is looking for a sustainability director to lead up our efforts. This comes after two years of work and hiring a consultant (Brightworks out of California) to help us prepare and take the next steps. I... Read more

I was asked to share this with my network...

"For colleagues working with LCA data, during design, construction, or facility management proces, please help us understand how EPDs are useful in your processes by completing the survey below:"

https://www.linkedin.com/posts/ashrant-aryal-2354497a_qualtrics-survey-q...

Small Firm Sustainable Design Leaders –

I find it hard to believe calls for session proposals are already out for next year’s AIA Conference on Architecture.  I feel like I just got back!

At my firm, we try to have all principals and associates to submit a proposal each year.  I had a couple of take-aways from this year’s... Read more

Welcome to the quiz portion of "How to Access the Full Power of Biophilia."

Learning Objectives
Upon completing this course, participants will be able to:


Define biophilic design and describe how implementing it can contribute to human health and well-being as well as environmental regeneration. Understand the three major... Read more

Hey team,

I'll go look to see who's in the MEP group, but does anyone in this circle have a northern California design engineer for institutional work that they'd particularly recommend? A group of folks we're engaged with is apparently having difficulty identifying a California-based MEP that everyone universally likes for high-... Read more

Hello All,
Checking in on experience with Armstrong's Tectum E-N with NEOPOR Graphite polysytrene GPS rigid foam insulation core in roof panels for exposed structure?
BASF says that NEOPOR uses up to 30% less material than other rigid foam; it is greenguard gold cerified. 

Interesting that the NEOPOR increases in R-value as... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

Hey all,

At the retreat, many of you spoke to me about wanting to learn more about our Foundations Resilience event in Houston in November. As it happens, our website just went live and I thought that I would share it with the whole group. Registration (for those interested) will be up and running very soon, but this should give you a... Read more