We have a client for whom we are designing a very high performance manufacturing facility, and they want to communicate their building's performance both dynamically and in real-time within their lobby for guests and staff.

We would like to mine the wisdom of this group to see what recommendations we can muster regarding high quality... Read more

Question for you all: there is this wonderful graph showing how we can shift mechanical and electrical dollars into envelope investments to make deep energy savings cost-neutral. Have you experienced this on a project?

1-minute or less survey! (two questions, more detail if you want)

https://docs.google.com/forms/d/e/... Read more

Pint-flush and non-water urinals can save tens of thousands of gallons of potable water per year. A single non-water-using urinal can save more than 10,000 gallons of water per year compared with the U.S. EPA standard of 1.0 gallon per flush (gpf).

When older 3.0 gpf urinals are replaced, the savings can be as great as 50,000 gallons... Read more

Hi folks,

We will be having a call for the Sustainable MEP Leaders group on Monday, April 8 at 3pm Eastern time. Hope you can join us! We'll be talking about our first in-person Summit, as well as diving into discussion about some top-of-mind topics related to being a sustainability point person within an MEP commercial practice. Here’s... Read more

I am looking for case studies/trying to identify buildings using concrete mixes with upwards of 30% replacement of cement by SCMs.  I've been in conversations with some structural engineers who are interested in lowering embodied carbon in upcoming projects, but would like to see examples of where this level of replacement has been successfully... Read more

Is there a list of which number corresponds with each Best Practice? E.g. "03 Energy Audit & Planning."

Hi folks! Our AIA Seattle Committee on the Environment is hosting a series of decarbonization talks that might be of interest to this group. The next one is coming up next Thursday with the University of Washington. 

Details and free registration here: https://aiaseattle.org/event/cote-university-of-washingtons-pathway-to-d...

Does anyone here have a draft spec for low embodied carbon concrete they could share? I see the GSA has a standards sheet with MGWP limits, but we are hoping to actually specify the mix for upcoming projects.

Thanks to everyone who joined us for the Show and Tell at Greenbuild! Here are slides from the presentations:

This is specifically to Chris but also to anybody who is interested in the topic - which Chris raised on our SAL call today, regarding how to influence change:

From this article, which i thought was good but had a great paragraph pulled below.

https://www.nytimes.com/2020/02/12/business/Steve-Mollenkopf-Qualcomm-corner-office.html... Read more

Building Green is the longest continuous running green building publication in the world. Its originator, West River Communications, was founded in 1985 as “a company that would translate technical information on energy efficiency and other environmental topics for the public and building... Read more

Colleagues,

As we all know, ventilation rates must be kept the same between the LEED Baseline and proposed energy models. However, we're aware of projects that have been able to claim energy savings associated to reducing ventilation using systems like Aircuity. 

Have any of you successfully claimed credit for reduced airflow due... Read more

Hi all,

I had a position listed for a Sustainable Design Coordinator which we have down for the moment as we've taken on a fall intern instead. In the interim, however, I did have a couple of great candidates that I'd like to help find good matches. One of those candidates is Marissa Lantieri, see her resume and portolio attached.

I'm guessing this is the most impactful thing any of us could do over the next couple of years. Energy Codes are far and away the biggest lever that our industry has in fighting climate change. I'm up to my eyeballs in commitments at the moment but heartily encourage you (yes, YOU!) to sign up.

...

Hi all – if any of you are... Read more

Welcome to the quiz portion of Choosing Windows: Looking Through the Options.

Learning Objectives
Upon completing this course, participants will be able to:


1. Choose a frame material based on its structural characteristics, thermal insulation, durability, maintenance requirements, cost, and effects on the... Read more

Curious on stories when IAQ testing for LEED or WELL didn't come back with "all clear, everything's good" results we all hope for. 

I have a project right now where we are tracking down suspicious sources and look forward to telling the full story when it's done being written. 

Thought maybe this would be a good safe space to talk... Read more

Hey Everyone!

We are delighted to share a major milestone in our commitment to sustainable design. After two+ years of intensive research, refining, and internal application, NBBJ is thrilled to announce the external launch of ZeroGuide, an innovative tool for early-phase carbon estimation, now available to the entire AEC community!... Read more