I was wondering if any design or contractor friend here can kindly share the carbon emission factor of excavation during construction. 

I found a paper that provides energy use rate per cubic meter and associated carbon emission in kgCO2 for different phase of construction such as excavation earth work, pouring and lifting concrete,... Read more

Hi all!

NESEA's BuildingEnergy Boston is happening March 28-29 at the Westin in Boston's Seaport. Would anyone like to meet up there? There are a few happy hour-like events we could meet at in the Trade show space or I'm open to other ideas! Let me know if you're interested. Here is more info: https://nesea.org/conference/buildingenergy-... Read more

Board insulation has good thermal performance ranging from about R-4 to R-8 and is used as an integral part of a building envelope’s continuous insulation system.

Because board insulation is used on the building exterior, it is not always subject to the same material health and emissions requirements as batt insulation used inside the... Read more

Hive mind,

We recently learned that 3M has discontinued the production of their 3M Daylight Redirecting Film (https://www.3m.com/3M/en_US/building-window-solutions-us/solutions/dayli...). This product was selected by an architecture client last year as the optimal daylight/glare control strategy for a school project, and we're assisting... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more

Thank you to everyone who signed on to the Materials Pledge letter.  It was officially released on April 15th with 56 signatory firms.  The Materials Pledge will soon have a new home online and a way to continuously add more signatory firms.  I'm keeping a list for now and there are already four more firms who want to join.  I will let everyone... Read more

Hi SDL: sorry to send another missive so soon but I wanted all to be aware of a great new effort just announced today coming from Greg Kats and Vivian Loftness among others - The Smart Surfaces Coalition. This effort brings together resources and research around city-scale resilience. "The Coalition is committed to the rapid, cost-effective... Read more

Welcome to the quiz portion of Energy Modeling: Early and Often.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the energy and cost-savings benefits... Read more

This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Does anyone know of a good summary of state and local energy code adoption for new building and ordinances for existing buildings? I know of this energycodes.gov site, but it feels somewhat misleading when you dig into it. For example, in CO, it suggests there is no min code, but there is, and it doesn’t show the extent to which local govs are... Read more

Hi, we need 3-4 folks to volunteer to join us to work out a draft Materials section for the Contractors Commitment.  Meeting set for 6/16 @ 2 PM CST.

Please message me at pslloyd@leopardo.com if interested in participating.  I will forward out the meeting invite. If the time doesn't work, but you want to participate, I will share info in... Read more

Hi everyone, 

We’re so excited to announce that registration for the 2025 SCL Summit is now live! Register here and save your seat to join BuildingGreen, your SCL peers, and members of all three other networks for a first-of-its-kind summit this year.

In addition to the SCL Summit, you’ll have the option of joining us for the all-... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why is ESG relevant to building industry professionals? Many of us are accustomed to sustainability programs and reporting. In this one-hour deep dive, we tap leading ESG experts for answers to burning questions many of us in the industry have about the intersection between ESG goals and... Read more

Hi, this is a somewhat niche/specific question - we are working on an all-electric school (middle and high school) that includes a chemistry lab. The lab was going to have portable sources for flame experiments, but there is concern that the portable sources would be unsafe for middle school students, so they are asking for a hard-pipe natural... Read more

There are so many great contractor-related sessions at Greenbuild this year! I doubt I'm alone in trying to choose between sessions.  

Is there interest in debriefing with SCLers the week after (say Novemeber 9th at 2pm ET?). We could share the golden nuggets from the sessions we attended, saving everyone from wading through the session... Read more