THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

The webinar occurred on Wednesday, February 23rd at 2:00 eastern.

USGBC and IWBI are beginning to see eye to eye across a range of focus areas. Knowing how to leverage each in a mutually beneficial way is the key to driving... Read more

Hi all,

We've had a number of clients in the states surrounding Texas that have been hit with really high natural gas bills for February. Some as high as $2.00+/therm. Many are healthcare facilities.  Has anyone seen any federal, state, or utility relief programs that are assisting customers with these bills?

Thanks, 

Adam... Read more

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more

Ventilation fans, kitchen range hoods, and laboratory fume hoods can use significant amounts of energy from both the fan motor and from venting heated/cooled air out of the building—air that then has to be replaced and conditioned by energy-intensive HVAC systems.

BuildingGreen-Approved Ventilation Fans

BuildingGreen ventilation... Read more

Hello all, 

Wondering if anyone has experience with lead limits in electrical cable and wiring? 

LEED for Healthcare allows a limit of 300 ppm of lead in electrical wire and cabling - my search for compliant products has been all dead ends. (MRc PBT Source Reduction - lead, cadmium, and copper)

Acceptable regulations for... Read more

We are pursuing sustainability goals (and documentation of those goals) outside of any certification/rating system for a current project.  However, we have set up a criteria list of goals by following strategies/credits from many of those systems (LEED v4 EPDs, SITES v2 threatened tree species, WELL v2 mindful eating, etc.).  This approach is... Read more

Welcome to the quiz portion of Getting Flame Retardants Out of Foam Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Summarize why and how flame retardants are used in foam insulation.
2. Elucidate the case for taking the chemicals out of foam insulation.
3.... Read more

Friends,

We put a lot of effort into air tightness design, detailing, and construction administration, often including 6-sided mockup and parital or whole-building blower-door testing.  For commercial buildings, these tests measure air leakage in cfm/sf at 1.57 psf (75pa).  

I came across this research paper several years ago, but... Read more

Hi All,

Has anyone successfully adopted a Revit to ClimateStudio workflow with their new export tool? Right now we are using cove.tool because it works reasonably well with iterative Revit modeling, but are itching to try a more accurate and nuanced alternative.

Thanks for any and all experiences!
Misha

Hello Everyone,

Here are some of the Show & Tell presentations from the 2019 SDL Winter Summit, enjoy!!

Best,

RoseAnn

Hello,

The Baltimore office for Hord Coplan Macht is looking to hire a Sustainability Coordinator.  Please find the specifics here https://workforcenow.adp.com/jobs/apply/posting.html?client=hcm2&jobId=4... or attached and pass along if you know of someone who may be a good fit.

Thank you,

Ara Massey 

Quiz body not needed for this auto-confirmation

Hello everyone - 

I'm writing today to let you all know that as of this month, I am retiring from SERA, and that I'm going to be beginning a new journey as a consultant/volunteer!

I'm going to continue dedicating my time to policy and advocacy work (focused on decarbonizing the built environment) but now I'll be doing it as a free... Read more

Good evening,

I am looking for suggestions to replace"wood" siding at the 25-year-old Lyle Center for Regenerative Studies and as always there is no solution that does it all. There seem to be three main options: wood, composition siding, or fiber cement siding. I am looking for something with low embodied carbon, little maintenance,... Read more

Not to distract from Tanya's post, but we too have a new opening for a Sustainability Specialist in our Dallas office. If you know anyone...https://careers-pagethink.icims.com/jobs/1254/sustainability-specialist/job

Hi MEP Leaders!

Here's a reminder that our monthly meeting is coming right up--today at 2:00 pm ET.

There is a lot to talk about: James has put together a starting point for our "how to make the best use of your engineer" guide. And Summit plans...

You can view the agenda here.

All members of the SMEPL network are... Read more