Does anyone know of a source for finding the operational solid waste generated by typical building/use types (weight/sf)? I couldn't find anything on LEED, True, or EPA. I found this table but isn't by sq ft for many of hte uses. Waste Generated by Industry and Building Type (wastecare.com)

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Welcome to the quiz portion of Energy-Efficient Multifamily Housing.

Learning Objectives
Upon completing this course, participants will be able to:


1. Restate the six big opportunities for energy savings in multifamily housing.
2. Differentiate between the four green building rating systems for new... Read more

Hi all and Happy New Year: I'm writing  to make sure that you're aware of the USGBC's call for members for a new LEED Resilience Working Group.  See below.  The deadline is coming right up -  Please pass this along to others you may think of in the topic areas they identify below.

Thanks

Mary Ann

I wanted to let you know... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Building Green is the longest continuous running green building publication in the world. Its originator, West River Communications, was founded in 1985 as "a company that would translate technical information on energy efficiency and other environmental topics for the public and building... Read more

Hi friends,

We recently tracked our water consumption on site during the structural demolition of some existing reinforced concrete buildings.  The new OSHA silica regulations required us to keep dust to virtually zero, so we had a bunch of mist cannons and water hoses pumping water around the clock.  We consumed ~855,000 gallons in a... Read more

Welcome to the quiz portion of "The Potential of Prefab: How Modular Construction Can Be Green"!

Learning Objectives
Upon completing this course, participants will be able to:


This are opportunities for us to get involved as design and construction allies with the new administration and the US Department of Energy on more efficient building.

The first link below is for low-carbon projects that will provide the case studies and solutions that the industry can follow.  The second is identifying barriers and... Read more

Please share this info with any contacts you have that you think would be a good candidate for our Design Performance Coordinator position -- Thanks!

Design Performance Coordinator in San Antonio

I was recently asked about potentially specifying concrete with wood nanoparticles and concrete with biochar as a way to further lower the embodied carbon and to increase concrete strength.  These approaches are something I know nothing about, and wondering if anyone in this group has any experience and/or observations that might be relevant to... Read more

I am looking for example specifications for low carbon concrete to have our structural engineer(s) review and incorporate.  Does anyone have good examples or  link(s) to good examples?

Thanks,

Mark

Is anyone aware of research or guidance that has looked at VOC’s from roofing products and ventilation intakes? I’ve done some searching, and focus is mainly on managing the construction process to reduce installer exposure. 

Thanks for any help!

Tate

Hey all,

Question for those of you who do in-house daylight analysis about modeling translucent glazing.

We use ClimateStudio for our modeling. It has plenty of material options for clear glazing but nothing for translucent glazing, and we are trying to understand the impacts of a translucent interlayer at some skylights. We can... Read more