Forum topic
Hello Community!
I often get asked about the application cases of annual vs. marginal emissions. Are you aware of an ASHRAE standard or journal article that concisely describes the use case for different CO2 eq. metrics? Has anyone reviewed ASHRAE Standard 240P: Evaluating Greenhouse Gas (GHG) and Carbon Emissions in Building Design,... Read moreProduct Guide
Alerting building occupants about indoor air pollutants is important in many situations.
BuildingGreen-Approved IAQ Equipment
Products approved by BuildingGreen range from single-use test kits to monitoring systems installed throughout a building. Some test for gases such as radon, VOCs, or carbon monoxide, and some for mold and... Read more
Forum topic
Hi folks,
I’m sure most of you know Gail Brager, or at least know of her. For those who don’t, she helps run UC Berkeley’s Center for the Built Environment and is a long-time champion of all the things that make buildings work for their occupants. Perhaps most notably, she was a co-author of the Adaptive Thermal Comfort option in ASHRAE... Read more
Forum topic
Hi All,
Attached are the meeting notes from the Carbon Group's 2/26/20 -- also in the PDF are the slides presented in the 2/26 meeting.
Before our next meeting in late March/early April, we are looking for input on the following topic related to tracking and reporting carbon:
Building the business case / Case Studies from... Read moreForum topic
Hello Sustainable Design Leaders,
Mark your calendars for an exciting webinar next Wednesday, May 27th, at 2:30pm ET and REGISTER HERE!
Missing the Forest: How forest practices impact the carbon embodied in mass timber projects is a follow-up to last month’s conversation on embodied carbon and mass timber. The presenters will be... Read more
Forum topic
Does anyone have a recommendation for software that helps organize and track product and material selections for projects?
Thanks!
Forum topic
We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.
We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more
Forum topic
Hello SDLs!
Many of you have internal research groups or internal grants to foster thought leadership in your firms. We have run an annual research-innovation grant program for about the last 5-6 years. Anyone in our firm is allowed to apply, submit their idea, the time/budget they need, define a deliverable and then a small group... Read more
Quiz
Welcome to the quiz portion of Seal, Tape, Gasket: A Sticky Search for Better Materials.
Learning Objectives
Upon completing this course, participants will be able to:
1. Choose the best means of achieving barrier continuity for any given application.
2. Assess a joint sealant's service life and product... Read more
Forum topic
Hi,
Are any of you attending this conference? Michelle and I are doing this low-carbon concrete/EC policy work and can't attend this conference on short notice - but if YOU are attending - we might ask a couple of small favors (collecting specific info from trade show etc)
AND/OR: if any of you have attended in the past - was it... Read more
Forum topic
Hi! We're putting together a pre-summit survey to collect input from everyone who's signed up for the Summit; we'll use that to prep the agenda for our get-together July 9-10.
Based on our last few phone calls, here's a list of topics on our radar. If there are others you'd like to see added to the survey, or if you have more thoughts... Read more
Forum topic
I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more
Forum topic
Anyone else having this experience? We've got a LEED 2009 Core/Shell project that we've now been contracted to do a fitout within for one of the first tenants. If anyone else has had this experience and is willing to talk with me about how your process for it has gone, I'd be fantastically grateful.
Find me directly at awilson@asg-... Read more
Forum topic
Just highlighting a tool from Circular Ecology (the group that brings you the Inventory of Carbon and Energy data) for measuring Scope 1 and 2
https://circularecology.com/organisational-carbon-footprint-tool.html