Hi Everyone, 

Our Vancouver team is looking for some innovative, high performance  building retrofit case studies. We are have been retained to retrofit a significant heritage building in Vancouver and the client has a net zero carbon institutional goal. As such we are looking for some innovative precedents that will provide design and... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

Hi folks,

I hope you've seen the plug to sign onto the letter that's generated a flurry of messages on Green Gurus--I also emailed it out directly to everyone. We've got lots of architects on board, and a handful of engineers, but I think we just have one contractor so far (Thanks Theresa!)--it would be really awesome to have more.

Hey all,

We have a NAVFAC project going into construction that has indicated that they'd like to hire someone to help them with the construction tracking aspects of the UFC requirements, including the Guiding Principles Assessment (GPA) program through GBCI. We're on the design side, so cannot offer these services on our own project;... Read more

Hi folks,

I know the last thing we all need is another assignment, but I took a look at this survey and it really should be pretty quick. And we've been talking a lot about how we can be better advocates for the things we care about...maybe this is a chance to do that? 

From an email request: 

I am writing on behalf of an... Read more

As part of the Philadelphia AIA COTE, we have been proposing implementing sustainability in some fashion into the design awards with our chapter's design committee.  I know that many of you have been down this road before, and wanted to get your feedback at a high level about what your local COTE is doing.  Anyone who's interested, can you... Read more

Hi everyone - we have a new higher ed client who is committed to sustainability but not very knowledgeable about current topics such as carbon (both embodied and operational) or the electrification of buildings.  I need to educate them and would like to start with some easily-digestible background reading.  But as we all know, we're a bit dorky... Read more

Hi everyone!

My awesome colleague, Paula Melton, is doing a short talk for USGC about mass timber and wants to know if there are SCLers in the group that can share their experience. In particular: 

"I’m wondering particularly about how supply-chain and cost issues are affecting availability and decision-making, and what the onsite... Read more

We have another great class of COTE Top Ten winners—congratulations to all of you with recognized projects. Join us on May 10 at 2:00 pm Eastern time for an inside peak at many of this year’s winners, along with insights from jurors. CLICK HERE TO REGISTER.

To keep things open and honest we won’t be recording this session. This “safe... Read more

Based on current projects, pursuits, and ongoing thought leadership, the following are hot topics across the Stantec Buildings group.

Read on to stay up to date with evolving skills and expertise not only in your own BC but also... Read more

Welcome to the quiz portion of Choosing Insulation: High-Performance Roof Assemblies and Retrofits – Unit 4.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the industry trajectory of healthier alternatives to foam insulation.
2. Describe the nuances of insulation... Read more

Hi Green Gurus, 

I am happy to join this group, and would like to share a short introduction of myself. I’m Jais, and I am with FXCollaborative as a Sustainability Design Specialist working with Ilana Judah. I have been here little over a month and am enjoying it so much! 

I have studied architectural design focused on... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Most—but not all.

Four experts... Read more

Hello Everyone,

As the staff here at BuildingGreen prepares for our third peer network summit in two months, we'd like to share out the Summit Report from the first online summit with the Sustainable MEP Leaders. We're a little delayed in sharing this with the wider Green Gurus group, but there is still plenty of time to review before... Read more

Has anyone heard about batu or cumaru as substitutes for ipe? I am looking for a durable deckling material, and would appreciate your recommendations for sustainable choices!