It was great to see everyone who was able to join in the peer networks webinar and to be able to share a brief update on what the Defining and Measuring Resilient Outcomes working group has accomplished over the last year... and what we are looking forward to tackling in the coming year. 

I've both attached a copy of the deck here and... Read more

Our Green Team is holding a Biophilic Design workshop on Earth Day with our own staff for biophilic interventions within our office space. We are referencing the Biophilic Design Guidebook from LBC but it will be a shorter time frame, about 1.5 hours total. Last summer we introduced biophilia to the office through the exercise where each person... Read more

Welcome to the quiz portion of Making Your Own Electricity: Onsite Photovoltaic Systems.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the difference between crystalline and thin-film photovoltaic technologies, and the uses of each.
2. Describe the ways in which PV... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

Hi gang,

Following up on the recent Air Quality Design Jam at the summit, I’d like to round up the folks interested in supporting an Air Quality Working Group.

Didn’t attend the summit? No worries – everyone is welcome! We had a good group the other week and several of us want to continue the conversation.

The design jam... Read more

This might be going down a rabbit hole, but in moving to California this year I noticed that "zero net energy" (ZNE) is the standard term, whereas "net zero energy" (NZE) was more common back east. The DOE's 2015 definition (below) uses "zero energy building" (ZEB), which to me implies a building uses no energy at all.

Regional... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

I wanted to alert you to this opportunity to help develop a new ASHRAE Standard. They are especially looking for people who have not served with ASHRAE previously (aka the usual suspects)

ASHRAE Standard 242P, Standard Method for Calculation of Building Operational Greenhouse Gas Emissions

1 Purpose: This standard provides a... Read more

Good Morning;

I wanted to share a resource that everybody might not be aware of - HomeFree by the Healthy Building Network which can be found here:  https://homefree.healthybuilding.net/products

Most of us know that HBN exists, but i think many folks just think HBN = Pharos, which is an extensive database behind a paywall that can... Read more

BITuser Meeting:  5/23/18

Participants:  Shane, Andrea, Angela

Notes:

Southface to provide "style tiles" before 6/15 
Greg to send to Andrea, couple dozen images for Best Practice pages
Southface will send, in week to 10 days, "full content" for BP03 - Energy Audit 
(BP03 "full content" will address... Read more

I'm hoping someone knows the anser to this question. For the LEED ND certification the minimum requirement is "The LEED project should contain at least two habitable buildings and be no larger than 1500 acres." Does habitable mean buildings with dwelling units?

Jake Gehrung
 

I have a client seeking grant funding & they're vetting current US technology around large-scale prefabricated mass timber. My question to this group is if this currently exists anywhere in the US.

Qualifications:

10+ years experience manufacturing and installing large-scale prefabricated mass timber elements into completed... Read more

I just saw this post from Conor on LinkedIn.

Starting in January 2019, all new Columbia Construction Company projects require LED temp lighting.

Are others doing this too? Frankly, given all the benefits and how quickly the industry is matured, it's hard for me to understand why anyone would use anything other than LEDs on a job.... Read more

Greetings Gurus, following the AIA COTE Design for Economy concept, does anyone have a resource for a list of building efficiency ratio "targets" by space type? I've always struggled with this initiative. 

Welcome to the quiz portion of Climate Analysis for Architects (recorded webcast).

Learning Objectives
Upon completing this course, participants will be able to:


1. Access climate data.
2. Choose appropriate design energy simulation tools.
3. Know when and how to run analyses with projected weather data... Read more

With the increasing need to support design with techncial expertise, I am curious to hear how others are meeting this challenge.  Do you build energy models in-house?  Do you have a team of experts whose sole responsibility is to support design teams with tasks such as energy modeling and LCA, or is that expertise distributed throughout the... Read more