Glazing connects occupants to the outdoors, but with so many opportunities for air leakage, poor insulation, and thermal bridging, glazing is the primary weak link in building energy performance.

BuildingGreen approves glazing that offers strong energy performance properties for a variety of... Read more

Hi all, hope you're keeping safe and healthy. I'm thinking about protocols to put in place on jobsites related to COVID-19 in addition to our IAQ plans. Wondering if anyone's company has started to layout specific protocols, PPE, etc. and is willing to share.

What got me thinking was this article from Prof. Joe Allen at Harvard about... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

Pipe that delivers domestic water in North America is typically made from copper, chlorinated polyvinyl chloride (CPVC), cross-linked polyethylene (PEX), all of which present environmental challenges. Bimodal polyethylene  (PE-RT) and polypropylene (PP) are potential alternatives with lower climate and health impacts.
... Read more

Do you know something about power purchas agreements, on or off-site?  I understand that they are legal in Washington and Oregon, where most of my projects are, but I haven't come across anyone who has used one on a project.  If you have some experience or expertise, it would be great to hear from you.  

Welcome to the quiz portion of Sustainable Sites: Primers from Environmental Building News.

Learning Objectives
Upon completing this course, participants will be able to:


1) Describe how invasive plants can harm an ecosystem, and why native plants are generally less work and less expensive.
2) Explain the... Read more

Electrochromic glazing holds the promise of less glare and better energy efficiency with fewer moving parts. The reality is much more complicated and includes information you won’t... Read more

Save the Date: If you'll be in DC for AIA's Conference on Architecture or just happen to live nearby, hold 6:00–8:30 pm on Wednesday, June 5 for this event.

We have partners! This event will be hosted by ZGF Architects (on their lovely rooftop patio) in collaboration with US Architects... Read more

Hello everyone,

So sorry that some of you couldn't get onto the call on Tuesday! There was a bit of a problem with our Zoom links. I think we've figured it out, so we should be all set next time.

Here are the notes from the call. If you have any questions about something on there, please feel free to post them here and we'll try... Read more

Our high performance consulting team is frustrated by project teams that regularly fall back on outdated rules of thumb in their system and equipment sizing. 

What challenges do you face in your work flow to limit oversizing and promote right-sizing?

By the way, Roger Chang, our literature search on the subject turned up an eleven... Read more

Hello fellow SD leaders,

This is a quick note to re-introduce myself to this group. I am a lapsed member from the original tribe of 2008 who has found my way back on a trail of bread crumbs left by Nadav (thanks Nadav!). I'm just glad to be back amongst my people, sharing and learning from you all, as we help each other to get where we... Read more

Hello lovely Green Gurus. Hope you all are well. I am wondering if anyone has installed an indoor sports floor that performed well and is low-emitting. This is for a multi-purpose gymnasium at a community center. Any chance?  Thanks All!

Wanted to let everyone know that Nadav and I are very excited about gathering in Las Vegas for our very first Summit of the Small Firm SDL peer network! We'll meet Wednesday afternoon, June 5, for a 4-hour concentrated session from 1:30-5:30 in Room N205. Here's the agenda. A group of us will be meeting on Tuesday to refine the content and flow... Read more

Friends,

Through AIA work I have been working with Kim Shinn from TLC Engineering. Kim is involved on the ASHRAE 209 development and has been advocating that the AIA, ASHRAE and USGBC align around this standard. Personally I think this is a good idea as I expect that this standard could easily make it's way into regulations and contracts... Read more

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

Hi SAL friends,

As some of you have heard by now, we've decided to shut down this Peer Network.

After several years of trying, we have not managed to activate it as we had hoped. Given the urgency of the collective action we need to transform the building industry into a force for good in the world, we all need to focus our... Read more

We are looking to refine our general office specifications to weed out harmful materials and to prioritize sustainability for all of our clients. Have you had good experience with outsourced specification writers who are helping to push sustainability forward? Who do you recommend? Bonus points if they are familiar with Massachusetts codes and... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more