Good Morning everyone.  i just wanted to send Congratulations out to the new class of fellows, with a shout out to Jonathan Weiss, Paul Hutton, and Ramana Koti.

Well done Gentleman!

Hi folks,

As you've no doubt heard from us by now (several times), in lieu of Summer Summits this year we're offering a combination of events this fall. Our series kicked off last week with a great Regional Mini-Summit in Boston. Regional events like this were in our plans before COVID blew everything up, so this one was a long-time... Read more

Nancy Eve Cohen is the managing editor at BuildingGreen. She brings the highest standards to her work, with the goal of providing trusted and accurate information and analysis for BuildingGreen’s readers.

Previously she worked in public radio as a reporter and editor for more than two decades, where she specialized in environmental... Read more

I know that there is a risk of starting a whole flurry of congrats through the forum, but this is a biggie, and deserves some recognition:

Congratulations Andrea and Melanie!! Huzzah!!

And a reminder--If you want to reach out to them privately, rather than through the forum, with your message, you can see anyone's email address by... Read more

Welcome to the quiz portion of Community-Scale Sustainability: Accelerating Change for People and Planet

Learning Objectives
Upon completing this course, participants will be able to:


Explain how combining stakeholder efforts and resources can achieve greater resilience and sustainability for communities.

Discuss... Read more

Welcome to the quiz portion of Cost-Effective Green Retrofits: Opportunities for Savings in Existing Buildings.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define the term retrocommissioning and list at least three examples of how it might help commercial building owners.... Read more

Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

Hello all, excuse the blast and the short timeline -- while not explicity sustainability-related, this is a great way to connect with the future of the profession, and can be a great opportunity for SDL firms on the west coast (a number of SDL firms already participate), specifically in Tacoma, Olympia, San Francisco, Sacramento, or San Diego.... Read more

Prefabricated, or modular, buildings can provide environmental advantages over conventionally constructed buildings. They are built in factories where manufacturing and cost can be tightly controlled, so materials are kept out of the elements, there is less waste, and thermal properties and air sealing can be enhanced. There are also fewer... Read more

Concrete and other cementitious materials have both environmental advantages and disadvantages. As builders and designers, should we be looking for alternatives or embracing concrete over competing materials?

This special report takes a look at how these materials are made, presents the key environmental considerations relating to their... Read more

This article just came up in my news feed. I thought you’d all like to read it. I will point out that C&D-specific MRFs have told me that they are really good at single-stream C & D waste, as long as the drywall is pulled out.  Any drywall in a single-stream C & D dumpster ends up in the landfill. Drywall just breaks apart and gets... Read more

Hi all - I’m wondering if any of you have heard of or use the National Green Building Standard, which appears to be primarily for residential and mixed use: https://www.homeinnovation.com/green.

The NGBS Green certification program is based on the ICC-700 National Green Building Standard and supposedly is the program of choice for many... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

As promised at the SDL Summer Summet: Hennepin County Energy & Environment's new Project Manager’s Guide to Material Reuse in Commercial Buildings, with specification language, guidance for procurement, and case studies of successful reuse projects around the country. This resource is meant to help owners, architects, and contractors... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

All,

Can anyone suggest a product for the following situation.  We are looking to insulate existing aluminum eterior column covers that have a three inch air gap.  The issue is there is no way to remove the covers without destroying them.  we would like to cut small holes, pump in the insulation  and then cap the holes.  Can anyone... Read more

Jenny/Dan:

What types of content do anticipate having in the Documentation Toolkit tab? Here's an example of what we have on LEEDuser:

https://leeduser.buildinggreen.com/credit/EBOM-2009/SSc5#tab-docs (login required)

The layout is a little complicated on LEEDuser, since we had to work with a lot of legacy content, but... Read more

Hi everyone,

As part of our monthly SDLS call yesterday, we looked through the 2020 SD Leaders Winter Summit Report. To help paint an even fuller picture of what was covered at that summit, here are slides from many of the 5-minute presentations.

As a note: we have permission from these presenters to share their slides within the... Read more