Hi SDL,

I'm heading to Greenbuild next week and one of my teammates who's not attending has asked me to look for expo hall vendors who are involved in Design for Freedom. He's starting up a new project that he thinks could be a good DFF pilot and wants to get some manufacturer contacts. Is there any kind of informal DFF meetup happening... Read more

I’m a volunteer member of the ASHRAE 209 ("Energy Simulation Aided Design for Buildings Except Low-Rise Residential Buildings”) Committee.  Are you familiar with ASHRAE 209? It was first published in 2018, and it outlines a process for incorporating energy modeling into the design process. 

From the forward: 

 ASHRAE Standard 209... Read more

Just had a contractor call who said they had a university client interested in using natural-gas-fed fuel cells as an alternative to grid power in some applications.  They were interested in an intermediate scale: 300kW.

Anyone with any experience with these devices? 

All,

I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more

So every year about this time I get to spend many lovely moments with our AIA 2030 Reporting data. In order to make the data useful the CBECS baselines/National baselines aren't great in telling us how we did.

For about half our 15 projects that we report in the average year - performing arts, convention, data science schools, etc - a... Read more

Evaporative coolers use far less electricity than conventional refrigerant-cycle air conditioners and they operate without the use of refrigerants, both features that make them attractive for green buildings. However, their suitability is limited to drier climates, and most products use significant quantities of water.

BuildingGreen... Read more

For those folks who are on our retrofit electrfication roadmap post-palooza-sub-sub-working group ;-) , I thought you might be interested in these three guides just released from BEI in collaboration with S. Winter Associates.

Here are the three Playbooks:

Hi,

Does anyone have experience or advice with installing temporary weather stations to gather data? We have a couple of projects coming up on existing occupied sites, and I would like to get what data I can from the sites to supplement the city weather file which is, as always, measured absolutely miles from site. There are thousands of... Read more

Welcome to the quiz portion of Energy Modeling for Early Design Decisions (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how energy codes and standards are pushing commercial projects beyond what they can do without modeling.
2. Describe the key... Read more

Hi Folks - 

The "request for participation" email below is from Brendan Owens, who most of you know was at the USGBC for over 18 years, and is now the Chief Sustainability Officer for the US Dept of Defense. As I read the text, I couldn't help but think of this group as a deep well of expertise and experience that could undoubtedly help... Read more

It is with the greatest pleasure that I announce to this esteemed group the recognition of our very own and much-loved leader Nadav Malin as an Honorary AIA member. AIA COTE had the honor to serve as Nadav's sponsor and we are pleased and delighted with this outcome (but not surprised of course.) For the record, "The AIA recognizes the notable... Read more

Entegrity is advertising for two positions for Certification experts, one in Little Rock, AR and the other remote. If you know anyone looking for a change send them my way.

https://entegritypartners.com/careers/

Hello! We are currently working on an LBC Petal project pursuing the Materials Petal. Does anyone know whether H1 lubricants are inherently Red List Free given they are food grade lubricants? We are trying to figure out whether NSF H1 registered lubricants need ingredient reporting or whether the NSF registration works similar to Delcare, RoHS... Read more

I am looking for a healthy and safe mold preventative product to use on wood construction to prevent mold growth as this full wood building (truss, framing, exterior sheathing) will be exposed to moisture via the elements until the roof gets put on in earlywinter.

Please share your feedback, thus far we have found what looks like a lot... Read more

Our firm held off from signing the AIA Materials Pledge because it was perceived as a feel-good commitment to promise to have good intentions, with no tracking.  I was pleased to learn yesterday that reporting for signatories of the AIA Materials Pledge would "open" today (July 18) and close August 31, and would include mandatory reporting on... Read more

We have a project that is looking for plaster/stucco/textured wall products that are sustainable, or “more sustainable.”

I know these products exist, but I haven’t had to spec or work with any, so I’m reaching out.

The project is in MA, so I'm also soliciting recommendations for products and/or companies who are experienced using... Read more