Prefabricated, or modular, buildings can provide environmental advantages over conventionally constructed buildings. They are built in factories where manufacturing and cost can be tightly controlled, so materials are kept out of the elements, there is less waste, and thermal properties and air sealing can be enhanced. There are also fewer... Read more

Hello Green Gurus,

Now is a pivotal moment. Net Zero Stretch Code legislation has been proposed in the Massachusetts House and Senate, and draft code language is currently being developed by the Board of Building Regulations and Standards (BBRS). The Net Zero Stretch Code is currently the greatest single opportunity to support reduced... Read more

Hello all!

I'm new to the group, and so excited to be here. Two part question here (as we think about processes and new year goals).

I am at a smallish firm (20 people) in Boston helping to reform our processes to enable even those that are not steeped in sustainability at a daily level to be comfortable looking for opporutunities... Read more

Following up on one of our conversations on the vision vacuum and sustainability beyond certifications, I would like to help facilitate an offline conversation with anyone working within their firm to use the AIA COTE measures as a guiding framework in their firms/projects. Attached are my slides on my first pass at thinking about this at Page... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Hello - 

I am looking for the recording and the PDF/ slides that were shared 3/6 for the project process share-out/ 5 min presentations. It was super inspiring and I would like to refresh my memory of some of what was shared. Thank you!

–
Alison Nash 
AIA, LEED AP ID+C, CPHC, WELL AP
Associate | Sustainability... Read more

Hi all - I’m wondering if any of you have heard of or use the National Green Building Standard, which appears to be primarily for residential and mixed use: https://www.homeinnovation.com/green.

The NGBS Green certification program is based on the ICC-700 National Green Building Standard and supposedly is the program of choice for many... Read more

If anyone else has gotten confused going between parts-per-million and percentages (parts per hundred!) for material reporting here's a little infographic that might help. Feel free to use or improve! 

Electrochromic glazing holds the promise of less glare and better energy efficiency with fewer moving parts. The reality is much more complicated and includes information you won’t... Read more

Welcome to the quiz portion of Video: Insights to Success on LEED-CI Certification.

Learning Objectives
Upon completing this course, participants will be able to:


1. Identify key changes to LEED CI 2009 (ID+C).
2. Identify the circumstances of a LEED-CI project that challenge the abilityto certify.
3.... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

Welcome to the quiz portion of LEED vs. Green Globes: A Definitive Analysis

Note: If you are taking this quiz as a member of LEEDuser, please take the quiz here.

Learning Objectives
Upon completing this course, participants will be able to:


1. Highlight the most significant differences between LEED and Green... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hello, All!  I'm hoping for your help to keep a green roof on a project of ours.  We have a large healthcare project in the Midwest that is coming in over budget.  To avoid losing our extensive green roof, I'm looking for alternate sources of funding - grants, private sources, etc.  Has anyone gone down this path before and have shareable... Read more

Katherine keeps BuildingGreen’s physical and digital spaces running smoothly. A graduate with honors from the University of Iowa, Katherine has a background in filmmaking and administration. She lives in southeastern Vermont with her partner and enjoys hiking, board games, writing, and cats.

Has anyone completed an LCA for an engineering structures lab, particularly one that has a strong wall and strong floor? 

Welcome to the quiz portion of Deep Dive into the Integrative Process with Marcus Sheffer (recorded webinar)

Learning Objectives
Upon completing this course, participants will be able to: