Standard HVAC systems require large fans and ductwork to move conditioned air throughout a building, which wastes energy and building space.

BuildingGreen-Approved Chilled Beams

BuildingGreen lists chilled beams that rely on water and smaller ducts to provide HVAC throughout a building.

Performance and Health Considerations... Read more

Looking for an example or case study for a building utilizing a radiant heating/cooling in climate zone 4a. General use type is office with some public assembly spaces, total of 85,000 sf.

As usual, everyone, especially mechanical engineer, is terrified by the thought of "condensation." So far, I read a DGWW case study, "Energy... Read more

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more

Has anyone documented the Food Alternatives credit as part of WELL or as an innovation credit in LEED?

Hello all,

I need future weather files for a project. We are looking at three years, 2050, 2075, and 2095 using two climate change scenarios, low emissions, and high emissions. I have seen ARUP's Weathershift site that uses RCP 8.5 and RCP 4.5. Are we assuming that 2.6 is not achievable? I would have used this as a low emissions scenario... Read more

A building project brings brothers back together, but a fast-moving storm challenges the project and the family.
Of storms & chins »

Whistleblowers alert state health agencies to possible foot fungus scourge... Read more

I'm looking to compile an outdoor weather station for a local project, and we'd like to add local outdoor CO2 information to our data. I usually work with Onset HOBO products, but they don't offer an outdoor CO2 sensor. Their weather stations can take data from any CO2 sensor with an analog output - does anyone have any suggestions?

Hey there SDLs!

We're having a debate in our firm about whether we're at a tipping point to hire an in-house energy modeler - someone capable of doing an MEP-caliber energy model inside a design firm. I know some you have in-house energy modelers on staff and I'd love to hear your experiences:

- How did you know your firm was at a... Read more

Welcome to the quiz portion of An Advocate’s Guide to Resilience Regulations!

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain how U.S. municipalities are using codes to improve the resilience of the built environment in the face of worsening climate change.

2. Delineate five... Read more

Welcome to the quiz portion of Choosing Insulation: Health and Environmental Considerations – Unit 1.

Learning Objectives
Upon completing this course, participants will be able to:


1. Discuss how insulation works.
2. Summarize how insulation performance is measured and reported.
3. Recount the wide... Read more

Greetings, All.

The Resilient Outcomes Working group has been putting together a resource list (and map) of resources for supporting resilience-focused design across the US.  So far, we have around 50 resources on the list, ranging from the AIA Resilient Design Toolkit to local Vulnerability and Adaptation reports and tools.

We... Read more

On LEEDuser we divide checklists into multiple project phases. Specifically:

How many of these phases are relevant for BIT best practices?

Note that we also... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Concrete is one of the construction industry’s largest carbon emitters, responsible for about 5% to 8% of the world’s anthropogenic greenhouse gas emissions, yet it is also one of the most important building materials.

There are well-proven ways to reduce... Read more

Hi All,

My team member is leaving Webcor, and unfortunately that means we have to fill her big shoes with someone new! I thought I'd reachout here and see if you know anyone of high caliber looking for a Sustainability Manager position? Someone with LEED PM experience preferred, and a bit more technical background with MEP/ZNE ideally... Read more

Folks, it is with a heavy heart that I write this: Lance Hosey passed away unexpectedly on Friday. 

Many of you know him from the early days of the SDL group, or as an outsized presence at any of the many conferences where we overlap. He's been a list-maker, poll-taker and all around troublemaker in my life for over 20 years; I know I am... Read more

Hello fellow sustainable design leaders! I am about to kick off an intensive effort here at EHDD to refine our internal standards for materials. We will be considering both GWP as well as the health of materials (avoiding harmful chemicals). In addition to setting the standards, I will be working to develop a process to vet materials before... Read more

My dear collegues,

As I'm sure is true for many of us, the events of the past weeks (months/years/decades...) have emphatically reinforced to me the need for a radical shift in how we meaningfully address JEDI in what we do. One (admittedly small) step I've been thinking about are the statements of reconciliation that have become more... Read more