Hello Green Gurus! 

We are planning a virtual Show & Tell and Happy Hour for Oct. 30th 7pm - 9pm ET (4pm - 6pm PT) with a Halloween theme, bring your best costumes! We will hold presentations (virtually of course!) for about the first 1 hour and 20 minutes and then will transition to some fun Happy Hour festivities, sharing, and... Read more

Hey Gurus. Might anyone have experience, or thoughts, with regard to establishing an energy use baseline for a new advanced manufacturing facility we are working on for a regional technical community college? This type of academic facility is so relatively new, the program doesn't fall into the typical "College/University" building type from ... Read more

Hi- Happy Monday!  

Does anyone know if there is an open-source list of manufacturers that have take-back programs? Looking for a summary/spreadsheet with details (costs, qty, etc). I have a small list but I'm guessing there is already one out there...

Also, Doesn't stage D in LCA account for take-back programs? Could this be... Read more

Sorry this is last minute but it just came to my mind to share this as I am looking forward to this roundtable which is happenging Wed, July27th from 12-1pm EST. 

The Built Environment Plus Women in Green Roundtable is hosting some amazing women in the industry who are working on DEI issues for a panel discussion.  The conversation... Read more

As I mentioned in my five-minute presentation this morning and then discussed a little more in the break-out on RELi that followed, the full RELi Rating System, in its current form, has now been posted online: http://anyflip.com/zyqc/mdir/

Unfortunately, this is only posted as a flipbook, currently (viewable online only), and isn't... Read more

All,

Our firm has been struggling to find carbon reduction strategies for concrete that move us beyond a fly ash only approach. Frankly, the knowledge just isn't there internally or with our consultants. We've known that there are a few folks out there that have a deep bag of tricks, but we haven't had the chance to work with them... Read more

Welcome to the quiz portion of In-House Daylight Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain general daylighting theory and design.
2. Simulate towards better daylighting design.
3. Demonstrate how daylight modeling is used in practice.
4.... Read more

I am wanting to take the pulse of this group on behalf of a manufacturer who has asked us a similar question.

The company in question makes wood products and has had FSC CoC for over a decade. Recently, they are encountering issues with sourcing FSC for about 50% of the wood species they offer. There just aren't FSC sources available.... Read more

Sheathing should be designed for durability, but some sheathing materials can be toxic or may contribute to moisture issues inside the building envelope.

BuildingGreen-Approved Sheathing

Sheathing approved by BuildingGreen contains recycled content, rapidly renewable materials, or otherwise provides exceptional performance, such... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Hello Green Gurus,

Here is the information for this month's Peer Networks Webinar, Making the Case for Equity with Data: a Free Tool for Project Teams. We hope you will join us!

Register HERE.

Making the Case for Equity with Data: a Free Tool for Project Teams
Tuesday, July 27th, 2021
1pm - 2pm ET (10am - 11am... Read more

Hello Green Gurus.

I've been looking into EPDs lately and ran across a few companies with Product Envionmental Profiles (PEPs) which they say are also known as EPDs. Does anyone have any experience with PEPs or know if they actually are EPDs? They reference ISO standards 14040 and 14044 in the writing and ISO 14025 in the list of... Read more

Welcome to the quiz portion of Boost Happiness and Save Energy with Adaptive Thermal Comfort!

Learning Objectives
Upon completing this course, participants will be able to:


Define “adaptive thermal comfort” and explain how it can contribute to occupant health and satisfaction.

Compare the adaptive comfort model... Read more

Greetings!

Ayers Saint Gross is in search of a Sustainable Design Coordinator to join our team. This person is anticipated to sit in any one of our offices - Baltimore; Washington, DC; Tempe, Arizona; or Austin, Texas. Fit and skillset are more important than geography. The position is anticipated as full-time, but if the right candidate... Read more

Hello Sustainability Leaders,

Our next First Friday Fika* is tomorrow -- Friday, September 1st at 11am ET (8am PT). We'll meet on Zoom for some lightly structured coffee-chat time. This includes both facilitated sharing and open conversation about the topics you're interested in at the moment. Any Peer Network member who wants to say hi... Read more

I'm wondering if people are seeing any increase in WELL or Fitwel certification interest? Or any other 3rd party systems aimed at health and wellness? WELL seems like a higher bar and now WELL v2 offers more flexibility. Is interest and adoption of 3rd party health and wellness certs growing? 

Hi All,

I wanted to pass on a few cool things we have going on at Built Environment Plus (formerly USGBC MA)  I really am conscious of not spamming you often and reserve posts for some of our most exciting happenings.

August 5, Building Tech Forum/MaterialsCAN: Getting to Zero with Embodied Carbon. Featuring 13 5-minute... Read more

Hey Team,

I'm in a Living Future session where a number of manufacturers are talking about the low uptake they're seeing in their take back programs. Contractor friends... What barriers (if any) are you running into in using take back programs? How might we as architects help increase utilization of these programs?

Aley