Beginning this year, Miller Hull will not only continue to quantify the upfront embodied carbon of every project we finish through construction, but now purchase third-party certified carbon offsets equivalent to one-third of the project’s impact. Great design is no longer enough - we must take responsibility for our architectural impact in the... Read more

Hello Green Gurus,

Some of you may have heard that the Sustainable Construction Leaders Group has been developing the Contractor’s Commitment, a set of sustainability guidelines for contractors to implement in their companies. 

The Contractor’s Commitment will be going live on November 13th with this half-hour webinar introducing... Read more

Welcome to the quiz portion of Boost Happiness and Save Energy with Adaptive Thermal Comfort!

Learning Objectives
Upon completing this course, participants will be able to:


Define “adaptive thermal comfort” and explain how it can contribute to occupant health and satisfaction.

Compare the adaptive comfort model... Read more

I received the following email from Naajia at Southface.  I'll be out of town until November 8, but I'll see if there's time for me to address at least the second part before I leave:

A question regarding the BIT-User Forum was brought to my attention by a participant. Apparently when you are posting a question and you pick your location... Read more

My colleague, Kira Gould, from the AIA National COTE communications committee, has a great question I am reposting here...

AIA National COTE: In the early 00s, COTE supported an initiative through which we created a Guide to the Green RFP and collected sample RFP language. That now dated guide is no longer findable in our resources and... Read more

Welcome to the quiz portion of The Chemicals on Our Carpets and Textiles.

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand when and where certain treatments may be superfluous or even pose unnecessary risks.
2. Recognize which applications might necessitate certain... Read more

Greetings!

Ayers Saint Gross is in search of a Sustainable Design Coordinator to join our team. This person is anticipated to sit in any one of our offices - Baltimore; Washington, DC; Tempe, Arizona; or Austin, Texas. Fit and skillset are more important than geography. The position is anticipated as full-time, but if the right candidate... Read more

Hello SD Leaders!

Two weeks ago a group of us gathered for the Winter 2020 Sustainable Design Leaders Summit. Those of us from BuildingGreen that were on site, greatly appreciated everyone's time and energy. It's always a pleasure to work along side you all!

Here is the summit report!

Reminder: We are giving a priority look... Read more

Choose a photovoltaic (PV) system to fit your energy needs, budget, and the space you have for installing the modules.

BuildingGreen-Approved PV

BuildingGreen approves PV modules that have high warranted minimum power ratings and high PTC (PVUsa test conditions).

Building-integrated PV (BIPV) products approved by... Read more

We are trying to figure out how we are going to meet the LEED Credit for Building Life Cycle Impact Reduction for the first time.

One approach we're trying out: We're taking the results of our Tally model and looking at potential reductions from low-carbon concrete. However, the problem I am encountering is that when I take some of our... Read more

Hello friends, Posting this to help out a friend that you all know!

(please reply directly to Kira at her email below) Tx

Dear Gurus, 

I am curating/hosting a panel at CarbonPositive RESET:

DESIGNED FOR CLIMATE: A New Construction Showcase

North & South America: September 8, 2020 | 4:45-5:25pm (PST)

Mass Timber Construction: An Economic Study of Supply, Best Use, and Implementation in three North American regions

This series unveils a macroeconomic study of building with mass timber in three U.S. regions; the Upper Midwest, Rocky Mountain Colorado, and the Southeast. 

Three companies - SCB Architects, LeMessurier, and Turner... Read more

Older buildings—especially those from the 1950s, ’60s, and ’70s—need our help. Many leave something to be desired in terms of aesthetics and comfort. But the truth is that they are part of the urban and suburban fabric now, and they aren’t going anywhere. As tempting as it might seem to tear them all down and replace them with high-performance... Read more

Hi - I'm wondering if you have recommendations for a web/mobile app for occupants to self-assess comfort at regular intervals. I've downloaded comfy, but it wants to actually DO something about thermal discomfort by alerting discomfort and connecting, I believe, to the BMS. We just want to collect information at this point. And since I'm a... Read more

I was asked to share this with my network...

"For colleagues working with LCA data, during design, construction, or facility management proces, please help us understand how EPDs are useful in your processes by completing the survey below:"

https://www.linkedin.com/posts/ashrant-aryal-2354497a_qualtrics-survey-q...

If your HVAC designers are addicted to the crack that is Trace 700, and knowing that Trane is giving up on that product in the coming year, what loads program are you weaning* them onto?

Asking for a friend:  Have any of you had success in using the Revit plug-in for loads?

*When told that they should use IESVE for loads, our HVAC... Read more