We had so much fun at our Contractor coffee talk that I reached out to our MEP friends to see if they would set up something similar.  And they have agreed to host a talk on Thursday December 2, at 1-2pm EST.  They will talk about decarbonizing buildings, on a schedule that keeps us under the 1.5° C limit and will also address strategies for... Read more

Hello Sustainable Design Leaders,

Mark your calendars for an exciting webinar next Wednesday, May 27th, at 2:30pm ET and REGISTER HERE!

Missing the Forest: How forest practices impact the carbon embodied in mass timber projects is a follow-up to last month’s conversation on embodied carbon and mass timber. The presenters will be... Read more

Hi All,

Attached are the meeting notes from the Carbon Group's 2/26/20 -- also in the PDF are the slides presented in the 2/26 meeting.

Before our next meeting in late March/early April, we are looking for input on the following topic related to tracking and reporting carbon:

Furnaces heat air that is then distributed through ducting and warm-air registers.

Approved by BuildingGreen

Products approved by BuildingGreen include the highest-efficiency, sealed-combustion furnaces and high-efficiency wood or multi-fuel furnaces. A multi-fuel furnace uses several sources of energy such as wood, wood-pellets,... Read more

We are cautiously rekindling the age-old debate: how are we balancing modeling software for design /visualization and performance analysis during early phase of design.  

We are heavy SketchUp users for early design, and most of our staff have access to COVE tool for early performance analysis. Problem is, I’d rather use Revit to COVE... Read more

SDL Group -

Hi all!  After a brief hiatus from the group to move from New Orleans to Portland (OR), start a new job at ZGF Architects, buy a house, and  see my baby boy become a toddler (all in the past year!)---- I'm ready to plug back into the group.  Seeing folks at the ILFI conference re-energized me to reengage :)

So…..does... Read more

I'm exploring the use of phase change material for a project. Specifically, looking at the BioPCM/ENRG Blanket product. I see on their website that ZGF used it at University of Washington. I'd love to hear any feedback from folks who have used it, and more specifically how your energy model and MEP engineer accounted for it. Thanks!! https://... Read more

It’s here! By popular demand we’re re-running the SDL Salary Survey that we last ran in 2015. 

This is for people who are currently in an SD Leader role at a firm. We’re sending this invitation out on both the Green Gurus and the SD Leaders forums, because some of you are still in transition and haven’t moved into the SD Leader forum yet... Read more

Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

HI MEP Leaders,

Related to our thread about equipment needed for decarbonization, I have a question about what new or improved equipment is already available now that you're excited about.

Every year we at BuildingGreen publish (and present at Greenbuild) a listing of the Top-10 new and exciting products. Our focus this year is on... Read more

Currently not for sale, being updated and re-released in November 2021.

New Guide to Thermal Insulation Report

The BuildingGreen Guide to Insulation provides detailed guidance on insulation products and practices, including cost comparisons and detailed recommendations on what insulation to use, and what to avoid. It's a treasure... Read more

Hi all,

We're doing some tool-related soul searching at WRNS and some folks here have raised Cove.Tool as a potentially interesting addition to our library. I'm looking for any insight you all can provide. Cove has come up various times, but curious if there's been any change for the better/worse in the past few years.

Do you use... Read more

Hello SMEPers,

I’m hoping to crowd source some anecdotes for a guest lecture I’ll be giving at Yale’s architecture school. The topic is integrated design (especially between architects and engineers) and how it enables better sustainability outcomes.

John Boecker has this great story about how choosing a paint color with higher... Read more

Hi all,

We are growing our sustainability group at Flad -- we have a great opportunity to make significant progress as we approach 2030, and we are currently looking for someone to join us in our Madison office. If you know someone who is looking for an entry-level sustainability position, and would enjoy living in Madison, Wisconsin, my... Read more

Hi all,

We are trying to encourage participation in take-back programs and using recyclable packaging with our vendors and I was wondering how we can add it to specifications. Does anyone have any examples on how we can add wording in specs about participation in take-back programs, using recyclable packaging and/or reducing non-... Read more

I had a client ask recently if there is a 'better' global social justice tool than ILFI's JUST for use outside the U.S. 

Personally, I'd look to WELLv2 feature C12 - Organizational Transparency for other options... but personally have very limited knowledge of options c-e.

Do folks have an opinion on if any of these prograams are... Read more