Are you ready to share the story about your best projects?

AIA COTE Top Ten Awards is a great way to get recognition for your best work and the call for submissions for the 2024 cycle is now open!

The awards cycle has shifted, and the deadline for the 2024 awards is October 26.

So NOW is the time to pull together... Read more

Hello Green Gurus!

ILFI’s annual Living Future Conference is coming up, so we thought we might host a (virtual) Show & Tell session of 5-minute versions of peer network members’ presentations like we often do in conjunction with Greenbuild. First we want to see if this is of interest to you all. Please take 30 seconds to let us know... Read more

Has anyone here performed circadian lighting studies for WELL using rhino/grasshopper (Lark Spectral Lighting)? 

It seems that Lark can only simulate circadian metrics for daylighting, and NOT electric lighting.  Can anyone shed some light on this?  pun intended :)

Are there any other tools out there that would enable us to... Read more

Protection against corrosion is the primary function of steel coatings, which often contain corrosion inhibitors, volatile solvents, heavy metals, and other hazardous chemicals.

These coatings are specified when steel is used structurally, outdoors, or in high-use areas. In these situations, hazardous coatings are often applied off-site... Read more

tate 

A draft of AIA’s Top Ten Toolkit was just published!

http://bit.ly/COTEtoolkit

Hopefully useful for everyone toward making more very high performance buildings. More updates to come, including interactive tools like a superspreadsheet. 

All the best,

Tate

Welcome to the quiz portion of Designing for Future Weather (recorded webcast)

Learning Objectives
Upon completing this course, participants will be able to:


1. Understand the science of climate-change predictions.
2. Stay abreast of changing climate models.
3. Learn how to make use of future weather... Read more

Hi Green Gurus: check out this new series from AIAU that delves into the design and planning application of the 4th National Climate Assessment Report by region with some more recent updates. Free to members...looks like some great speakers and highly relevant. 

https://aiau.aia.org/regional-tour-climate-risk-planning-and-design

... Read more

Please see the following invite from Professor Alexandra Rempel at the University of Oregon to participate a 15-20 minute phone/Zoom interview and share your experience and/or perceptions on the problems, challenges, and barriers to incorporating into your projects.

This effort is part of an NSF research grant that I am involved in and... Read more

Hello Green Gurus! We are diving deep into our carbon metrics this year and are finalizing some of our emissions factors for our Scope 1 and 2 emissions and in a few more months Scope 3. I'm hoping this brain trust has some recent knowledge to share on this topic. What we've found is there's a fairly big variance in what we've seen in published... Read more

The Resilient Outcomes Working Group grew from a session at the 2020 Winter Summit in Gulf Shores AL, and we are still going strong.  We are currently focused on three primary objectives: 1) bringing awareness to resilient design through a presentation at the GreenBuild 2024 Resilience Summit (we'd love to see some peer network friends at our... Read more

The Sages network is specifically for industry veterans and long-time Peer Network members, including those who are still active with one of the other networks and those who have moved on from that role. This group can help set priorities, drive advocacy, and... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Constructed wetlands and other natural filtration systems close the nutrient and water loop, permitting safe and sustainable wastewater treatment and reuse right on the site.

We look for... Read more

Hi All - I wanted to share out the All For Reuse initiative below by two peers in the sustainable materials management network. I know some SDL have already done much research on this from quite a few angles, and those with LBC experience probably even moreso in practice. 

Frances Yang (Arup) and Andrew Ellsworth (Doors Unhinged) have... Read more

We are putting together a free guide for firms who have not yet started to figure out what their internal standards are for healthy, low carbon materials/products. 

As part of this effort, we are looking to gather from all of you who already have standards - examples and precedent.

Also we are collecting standards from clients/... Read more

Can furniture be hazardous? You bet it can…

From flame retardants in foam cushions to unnecessary stain and dirt repellents on upholstery materials, everyday... Read more

Hello SDL Peers,

We are currently in the process of expanding our firmwide carbon reporting (and goal setting). I am looking to see if anyone has some "best practices" or examples of their own firm's journey to carbon neutrality. Any info or tips are welcome!

Thx, JP

We are attempting to use Tally on a couple projects and are wondering how others are using the tool in their design process. If any experienced users out there would be willing to have a brief phone conversation I would appreciate it. Thanks

Just in time for Saturday Night!!

Get out the popcorn and put away Netflix!
For those who were unfortunate enough to miss this LIVE - you still get to watch the awesome talents of our community! 

You sadly miss out on the camaraderie, connection and wonderfullness of hanging out with everyone (not recorded!) but you do get... Read more