We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

I was wondering if any of you have experience with integrated PVs and/or solar glass. If so, can you could recommend manufactures for each? We are working on a multistory freestanding building in an urban site for a mid-Atlantic city. Because our site and roof area are limited we are looking to maximized the areas where we can generate power.... Read more

Hey gang,

We're working on a project that's currently designed as mass timber. We're up against some cost control efforts (of course) and the CM/Client is asking about changing some of the building to steel or green steel. We set out with a goal on the project that within the core and shell, Module A GWP emissions will be net zero.... Read more

If anyone else has gotten confused going between parts-per-million and percentages (parts per hundred!) for material reporting here's a little infographic that might help. Feel free to use or improve! 

If you’ll be attending AIA24 (or if you live in the D.C. area), join us for the BuildingGreen Show & Tell on June 5th from 6:00-8:30pm at ZGF! This will be a free joint reception with members of US Architects Declare, and it’s open to all Peer Network members. Light refreshments and beverages will be served.

Here is the link to... Read more

Dear SD Leaders: The comment period closes January 31st on  NCA Volume II Climate Change Impacts, Risks, and Adaptation in the United States.

It's important to have the design communities perspective on these critical issues. I hope you can take a look and submit your comments before the deadline.

Details here: https://www.... Read more

***Cross-posting this from SCL Group***

Last year I was approached by Green Advantage, remember them from like 2005? There has been a LEED innovation credit for as long as I can remember.

Has anyone seen employed Green Advantage recently? Is anyone asking for it?

Do you see value in GCs/CMs/trades having this training... Read more

Dear SDL: Thanks to all who have already given their support to the AIA Resolution on Urgent and Sustained Climate Action. We're into the final push of getting out the vote to pass the resolution next Wednesday, June 5th afternoon in Las Vegas. This requires 2/3s of the voting delegates to pass. So we're asking anyone who 1) is attending as a... Read more

Welcome to the quiz portion of Resilient Design—Smarter Building for a Turbulent Future.

Learning Objectives
Upon completing this course, participants will be able to:


1. List three motivators for resilient design and at least three actions that address each motivator.
2. Explain why climate change isn't our... Read more

Auto-quiz used for CEUs for attendees of the 2023 SDL Winter Summit.

Greetings,

I'm looking for recommendations from this esteemed group for 3rd-party vendors/verifiers of GHG emissions to support our CSR initiatives. We currently have a provider, but our company has grown to the point to where we need to transition from "analaog" reporting (location by location) to a higher level of service offering (... Read more

Hans “Grumpy” Grimm

If only a few of the Best Practices will have checklists, which will be included under the "Implementation Toolkit" tab, I'm thinking we can simplify them (compared with LEEDuser).

I've attached a screenshot of a LEEDuser checklist. But I don't think BITuser will need the four types of icons, and the legend will take up more space than... Read more

hi all! I'm almost at the finish line with this year's 2030 reporting...whew. I'm running into an issue that I wanted to throw out to this group, regarding the zero tool and national average baselines. Hoping some of y'all who manage your firm's 2030 data, or are just more familiar with CBECS and related data, have some insight / experience to... Read more

Masquerade as the person for whom you want to purchase, then click link

BG annual

BG annual-comp

BG annual + free insulation report

BG annual + insulation report

LU annual + free insulation report

BG 79.00

SCDL

SAL

SDLS... Read more

Wall and corner guards increase durability, but these products are typically made of PVC.

BuildingGreen-Approved Guards

BuildingGreen approves products that avoid the use of PVC and are made with recycled content, FSC-certified wood, other biobased materials, or less-problematic plastics. 

Health and Environmental... Read more