Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

Hi everyone, 

Following November's SCL Summit, I put together a model Construction Waste Management Action Plan based on the ideas shared in our focus group. It is linked below in Google docs, so everyone should have access to live edit the plan. Please take a look and add comments if you can. It's a very rough outline, so we can... Read more

Hi,

We have a market-rate housing highrise project that is going through VE right now: we need cheaper/lighter rainscreen claddings than precast concrete or GFRC.

If you've gone through this similar exercise, I would greatly appreciate recommendations for cladding manufacturers/products with EPDs available. We are open to metal... Read more

We had a small group tour the Dell Seton Medical Center campus today, and a much larger group tour the new Austin Public Library. 

My favorite quote from the Medical Center tour, was about this project being the first private development on U of Texas property. "It took 58 separate legal agreements. We won a ULI award for making the... Read more

I'm looking to change consultants. Let me know if you have worked with a 179D consultant that you would recommend.

Hi Green Friends - I hesitated to post on April Fools, but wanted to get the link out for folks to share with their netowrks    I'll be teaching a workshop at the Pacific Energy Center on May 11 on Electrification Retrofits of Exisitng Non-Residential Buildings.  I'll be bulidng on the great work our sub-committee led by Allison has been... Read more

SDL

Glad to see some of you at the COTE event at our studio last week.

Has anybody heard of this company and technology? https://www.enverid.com

Thanks in advance, Zach

Zach Craun, WELL AP, LEED GA

Associate

COOKFOX ARCHITECTS, DPC

250 West 57th Street

New York, NY 10107

... Read more

Seeking Pros/Cons, Feedback/Commentary about signing the US Architects Declare Commitment. 

https://us.architectsdeclare.com/

Reviewing against the "shoulds" and "shalls" of the 2020 AIA Code of Ethics and Professional Conduct ... and other commitments that are out there ... any feedback welcome.

Tips for how your workflow... Read more

Hi SDL!

Our CM recently offered up the possibility of substituting Pozzotive into our structural and paving concrete mix (www.pozzotive.com) on a large public building. Apparently it is on a level with the cost of standard cement.
We are eager to reduce the project's embodied carbon, and this seems almost too good to be true.

Per our discussion on today's SMEP call, it would be interesting to have a more in-depth discussion on Indoor Air Quality. Questions I have personally...

Hi friends, 

Before i forget, here is the checklist I mentioned yesterday that got such a positive response in our office - again it came about after i was asked (for the Nth time) to write a sustainability description for a concept proposal/ RFP that I was not a part of and frankly didn't have a lot going for it. So it's framed as "you... Read more

Hi all. Not to poach from your awesome firms, but FXCollaborative is hiring a Sustainable Design Specialist. Here is the job posting:

Sustainable Design Specialist - FXCollaborative, Brooklyn, NY, US

Please send any great candidates my way!

Thanks,

Dan

The BuildingGreen/GreenStep exam prep materials are... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

CEUs are available for reading all the building-envelope product guides and primer. Click here to learn more and take the quiz.

Vapor retarders are meant to protect our building assemblies from getting wet, but they can also slow drying, contributing to mold and structural degradation.

BuildingGreen-Approved Vapor Retarders

I'm putting together information on natural gas bans (or put another way, all electric buildings) for an advocacy effort and looking for some experts. Anyone have thoughts on banning natural gas and other fossil fuels on residential projects? Specifically what are the considerations/challenges/opportunities at each scale (single family, low... Read more