Sign up now to roll up your sleeves and have fun solving real problems! April 28 from 3-5pm ET

DESIGNING FOR DECONSTRUCTION

Building deconstruction, or disassembly, is a critical strategy for carbon reduction, minimizing waste & contributing to a circular economy, yet remains a serious challenge for many reasons.

Many... Read more

All,

Beck is making great strides in our AIA 2030 Commitment and we are looking for an experienced energy modeler to join our team, please reach out if you know of anyone that is looking and has energy modeling experience.  the job is posted on our website:  https://beckgroup.applicantpro.com/jobs/1011136.html

Has anyone vetted through all the Epoxy and Resin-based flooring systems to see which flooring application is "healthier"?

Below is a preapproved list from our local health department:
• Tera Lite • Stonhard Stonclad, Stonclad Ut, Stonshield Hri • Sunbelt 110 • Everlast • Westcoat Epoxy Mortar, Slurry, Or Double Broadcast • Dex-O-... Read more

Split systems are multi-component units that use an outdoor condenser along with separate indoor fan coils to move refrigerant—and provide heating and cooling—in buildings without the need for ducts.

BuildingGreen-Approved Systems

BuildingGreen approves mini-splits that are tested to AHRI standards and have minimum SEER and an... Read more

Welcome to the quiz portion of Avoiding the Global Warming Impact of Insulation.

Learning Objectives
Upon completing this course, participants will be able to:


1. Define “embodied global warming potential” and “lifetime global warming potential” as they relate to insulation materials.
2. Describe why some... Read more

I am putting together my conference/training budgets for 2023 and I am hoping to add a BuidlingGreen SDL in-person summit to my list. Are there any plans for in-person summits in 2023? I seem to remember Nadav speculating about Puerto Rico as a location for a Winter summit. Wishful thinking?

Hello Green Gurus!

The open Peer Networking Meetups that began when Covid-19 struck and we were all suddenly working from home have proven their value. In consultation with those who were on the last few calls we’ve decided to make them a permanent, monthly event.

Feel free to join us if you’re interested in connecting with folks... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more

Hi everyone!

If you will be attending Greenbuild 2023 or live in the DC area, please join us for a Show & Tell!

When: Tuesday September 26, 6:30-9pm ET

Where: Perkins Eastman, 1 Thomas Cir NW #200, Washington, DC, 20005

Please sign up here to present/attend. Beverages and refreshments will be served. We look... Read more

Have any of you come across aqueous ozone product for hand sanitation?  https://www.3oescientific.com/

This company is selling to hospitals/schools.  May indeed be awesome, but so many "totally safe" products are proven not to be. Curious if this group has seen it or have looked at it's claims.

I looked through the forums and was surprised to see that from what I can tell this 2018 article from Yale I'm going to share here has not been discussed previously.  It basically says that FSC is not trustworthy, ineffective, and greenwashed, as critiqued by the likes of Greenpeace and others.

I would like to hear from someone in the... Read more

All,

Our firm has been struggling to find carbon reduction strategies for concrete that move us beyond a fly ash only approach. Frankly, the knowledge just isn't there internally or with our consultants. We've known that there are a few folks out there that have a deep bag of tricks, but we haven't had the chance to work with them... Read more

Welcome to the quiz portion of Innovative Products and Technology from the Greenbuild Expo

Learning Objectives
Upon completing this course, participants will be able to:


1. Direct attention to green building products and technologies that show exceptional potential, from a whole-systems perspective, to bring the... Read more

We are working on a large healthcare project in Minnesota.  We're setting sustainability goals a bit late - no certification, but targets with accountability.  I'm working to determine recycled steel content (for structural steel and rebar), and I've gotten a bit of push-back on recycled content based on being in the region of the Iron Range... Read more

Meet the winners:

2024
2023
2022
2021