Hi all!

I'm working on my first energy positive / passive house multifamily building and trying to figure out the trash/recycling chute. I am curious what solutions you have employed to make the trash chute air tight? We have excluded the whole chute from the envelope. Do you use airtight doors (and which ones?) at each floor trash/... Read more

Welcome to the quiz portion of The Four Core Issues to Tackle for Resilient Design (And the Programs That Can Help).

Learning Objectives
Upon completing this course, participants will be able to:


1. Use site-specific hazard analysis to evaluate a project’s resiliency demands.
2. Use climate change data to... Read more

Hi Everyone, just as governors are regionally deciding how to reopen their economies, it's probably time we started thinking about what getting back to work looks like for us.  And, just as governors are leaning on each other for ideas and coordination, we can benefit from discussing strategies as a group.  To that end, I wanted to get your... Read more

Is anyone else working on a project doing Living Building Challenge v4.0 Energy Petal? We're working through the Imperative 08 Net Positive Carbon Resiliency Strategy requirements that ask for the project to be habitable for a week in the event of an emergency. We're curious how others are defining "habitable" and what systems assumptions... Read more

The Sustainable Design Leaders peer group brings together the most committed sustainable design directors from leading architecture firms throughout the U.S. and Canada. We invite you to apply for membership.
We look for the... Read more

If you haven't seen it yet, today's U.N. report "Making Peace With Nature" tackles climate change, biodiversity loss, and pollution jointly within the framework of the Sustainable Development Goals. 

The analysis is anchored in current economic, social and ecological reality and framed by economics and the 2030 Agenda for Sustainable... Read more

What is the lag time for historical embodied carbon data catching up with real-time information as manufacturers source renewable energy? Is our professional time best spent calculating with out-of-date information or more simply calling for manufacturers' elimination of fossil fuel combustion in their production and transportation of materials... Read more

Does adding solar panels reduce a building's EUI?

Existing operational use of a building is 80 kBtu/sf/year. When we add solar, it will change the source of energy but does not change the usage.

My understanding is that the EUI does not change, but it would be good to hear from others.

It's energy consumption at the point... Read more

I'm looking to compare using an electric tower crane vs a diesel generated tower crane.  I've got the average gallons/hour for the size of crane I'm looking at, but when I reached out to the crane manufacturers, they can only tell me what size electric supply I need to provide, not the kWh usage for the cranes.  I know that it varies depending... Read more

Southface will need a procedure for adding and assigning SMEs to the BITuser site. Normally you could just create the user in BITuser and assign the role right there, but we have the added complication of Salesforce SSO, which means the sequence will have a few extra steps.

Here's the basic outline:

Wood decking requires potentially hazardous preservatives and stains, and plastic waste is a significant environmental problem.

BuildingGreen-Approved Decking

Composite decking approved by BuildingGreen has at least 50% total recycled content. For plastic decking, post-consumer content has to be greater than 50%.

Health and... Read more

Hi folks! I had a blast at the Show + Tell Tuesday night of Greenbuild. Thanks to Payette for hosting, and to Arrowstreet for joining Payette and BuildingGreen as sponsors. What a great way to get a "tasting-menu" Greenbuild experience!

I also caught a couple of great sessions on Friday morning. Polling others, it seems that the... Read more

I am looking for case studies/trying to identify buildings using concrete mixes with upwards of 30% replacement of cement by SCMs.  I've been in conversations with some structural engineers who are interested in lowering embodied carbon in upcoming projects, but would like to see examples of where this level of replacement has been successfully... Read more

All--

I haven't been part of this group in a while, but I'm excited to have rejoined recently. Some of you know that I joined HMC last year as Chief Impact Officer. I oversee design, sustainability, research, and communications for the firm, which has 300 people in 6 offices in California. We were founded in 1940 with a mission to serve... Read more

We have a project looking to use Radiant Floors to help with space heating.  I don't have experience with this so I'm looking for any insights.  Pros / Cons? 

This project is a non-profit and is needing to reach LEED Silver minimum.  This is in Washington State.  Thank you for your help.

Churn and renovations can disrupt occupants, release or introduce indoor pollutants, and increase the embodied footprint of a building.

BuildingGreen-Approved Partitions

Movable partition systems allow spaces to be easily reconfigured, reducing costs and environmental impact. BuildingGreen approves partitions and panels that have... Read more