Howdy all,

Following up on Emily's post (https://www.buildinggreen.com/forum/aia-2030-zero-tool-vs-cbecs-baseline) on AIA2030, the folks on the steering committee's monthly call thought it'd be a good idea to do a general call for feedback on reporting this year while the bangs and bruises are still fresh. The intent is to compile the... Read more

Hello SD Leaders!

I recently joined and looking forward to all the amazing dialog. I was told that for membership to be official, I must reveal my unsustainable secret. As much as I preach environmental protection in architecture, I’m a bit of a motorhead with a 1967 HP 289 Mustang that I resurrected from a junk yard when I was 16 — that... Read more

CEUs are available for reading our entire plumbing guide. Click here to learn more and take the quiz.

Excess heat generated by air conditioners, refrigerators, boilers, and water flowing through pipes typically goes unused.

BuildingGreen-Approved Water Heat Exchangers

BuildingGreen lists desuperheating technologies and... Read more

Has anyone done inherent bias training in their firm, and if so, how'd it go? Do you have someone you'd recommend as a trainer/facilitator?   Thanks!

Hi All,

I am looking for a lifecycle analysis consultant to work on a feasibility study in New York. They should have capacity to analyze and compare various architectural, structural and mechanical components for environmental impacts, primarily GHG emissions. Any recommendations are greatly appreciated.

_Ilana

Hi all,

I've tried a couple of different search terms for the forum but haven't been able to find any past conversations on electrochromic glazing yet (which makes me suspect I might be missing something...). We have a potential opportunity to use it in a vertical curtain wall application with a client that is very interested in the... Read more

Welcome to the quiz portion of In-House Daylight Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain general daylighting theory and design.
2. Simulate towards better daylighting design.
3. Demonstrate how daylight modeling is used in practice.
4.... Read more

Hi All:  We are in the design phase for a 5,700 SF project in NH. The team is taking care to drive down embodied carbon where possible. It will be NZE.

A1-A3 emissions are coming in at 67.15 kgCO2e/sf, of which 11.97 kgCO2e/sf is a hot spot attributed to permeable paving and concrete pavers (a little skewed, since lot and patio sizes... Read more

Call for Reviewers and Call for Proposals now out.  If you're not planning on submitting a proposal to present, please consider volunteering as a reviewer, subject matter expert or member of the Program Working Group.  The quality of the education program is directly proportional to the people who select it!  

See many of you in Alabama... Read more

Our building scientist has been using Insight 360 to model daylight and document it for LEED certifications.  However, it appears that Autodesk is no longer fully supporting the tool and may eventually stop all together.  (we have not been able to run simulations for weeks due to a change to how "cloud credits" work on their end that they... Read more

Hi everyone,

Just a reminder to please fill out the SDL 2024 Events Attendance Poll by the end of next Monday, December 18th. Thank you so much to those who have filled it out already! :) 

-Amanda

Has anyone submited this credit in lieu of demand response before?  I'm attempting on multiple projects but not sure what to expect review wise or how much confidence to have in the ability to get more than 1 point for trying.

https://www.usgbc.org/credits/gridoptimal-152-v4?return=/credits/New%20C...

Hi folks,

Some of you have seen me do a 5-minute presentation on an initiative to divert urine from wastewater. That team is now developing a building-scale urine treatment technology with support from the National Science Foundation's Small Business Innovative Research (SBIR) award. 

In order to learn more about the sustainable... Read more

He just posted the following on the Building Performance Knowledge Community forum:

Does anyone have a recommendation for software that is easy to use and relatively inexpensive for doing energy performance analysis at the schematic design (or before) phase?  We are looking for a tool that gives good quantitative comparisons for... Read more