Hello everyone, Happy New Year! 

I wanted to send a quick note that we have an awesome group registered for the Sustainable Design Leaders Winter Summit 2020 and we still have a few open seats! This is taking place Jan. 29th - 31st, 2020 at The Lodge, Gulf Shores, AL with an exciting Pre-Summit Workshop happening that Wednesday. If you... Read more

The construction sector’s take-make-waste approach to materials needs an overhaul. Materials and construction account for an estimated 11% of global greenhouse gas emissions annually. At the other end of the life cycle, demolition in the United States annually generates 90% of some 600 million tons of construction-sector debris. Getting trashed... Read more

This is deep nerdy stuff, so don't say you haven't been warned.  ASHRAE has opened the first public review to its net zero standard (228).  Here's the blurb:

Standard Method for Evaluating Zero Net Energy and Zero Net Carbon Building Performance ASHRAE Standard 228-202x sets requirements for evaluating whether a building or group of... Read more

Hi,

HKS is seeking two seasoned sustainability leaders to be part of the DesignGreen Team embedded into either our Mission Critical and Commercial Mixed Use practice. In general, the role is to service clients and drive sustainable design quality forward. We have a great team and need even more wise, energetic, creative, and committed... Read more

Can anyone point me to a (dream?) resource listing effective R-values of various wall assemblies?  We are trying to find a cost-effective R-40 wall assembly for a one and two story public middle school targeting net zero energy in Oregon.  Referencing Seonhee's "thermal bridging" thread in late April, I used Therm's native drawing feature, but... Read more

Dear Green Gurus: I'm so sorry to have missed seeing many of you at AIA last week. I heard the BG and COTE events were the highlights of the week! Congrats.

I'm sure by now you've heard of the dreadful Supreme Court decision about the EPA. I thought I'd share a helpful, if not sobering, perspective in an Op-Ed today in the Washington... Read more

BuildingGreen Approved, like its predecessor, GreenSpec, is an independent product evaluation service for BuildingGreen members. We offer an unbiased look at products: BuildingGreen does not accept any manufacturer fees for our evaluations. Here’s a quick tour of the platform and how to use it.

Hi, all. We missed you at the standing check in today. We have a couple of questions for the BG team:

1. What is the timing criteria you need for Best Practice content? We need to back into a deadline on submissions and believe your critical path timing will help define ours.

2. Can you elaborate on what LEED User/BG content may... Read more

Happy New Year Sustainability Leaders!

In case you did not see the Peer Networks Happenings email for January yet, here is a quick reminder: Happening this week, you're invited to join BuildingGreen's Top 10 Green Building Products for 2022 live webinar Thurs. Jan. 6 2022, 2pm ET (11am PT).

Register Here to reserve your seat!... Read more

Welcome to the quiz portion of Video: Eight Steps to Success with LEED-EBOM.

Learning Objectives
Upon completing this course, participants will be able to:


1. Describe the first steps project teams should take when considering LEED-Existing Buildings: O+M.
2. Understand the steps and timeline ofthe LEED-... Read more

I was wondering if any of you have experience with integrated PVs and/or solar glass. If so, can you could recommend manufactures for each? We are working on a multistory freestanding building in an urban site for a mid-Atlantic city. Because our site and roof area are limited we are looking to maximized the areas where we can generate power.... Read more

Hi folks,

I'm looking into lower-carbon pipe options for HVAC and plumbing. The MEP 2040 has slides from a Buro Happold study in 2020 showing PEX to be much lower in embodied carbon than copper, which is unsurprising. CPVC is also a lower-carbon option.

But PVC has its issues and neither PVC nor PEX are recyclable (especially if... Read more

Friends of EPIC –

Hey, everyone. As some of you might have heard, we’ve been working for a while with Autodesk to get c.scale (the data model behind EPIC) built into Forma – Autodesk’s AI-powered planning tool. Forma is packaged within Autodesk’s AEC collection and most firms using Revit should already have access. This integration is... Read more

Hi there colleagues!

Out of curiosity, do you plan on attending Greenbuild in person in San Diego in September? My staff asked me if we were going and my answer is partially contingent on the extent to which attending would mean getting to see some of our favorite people (read: all of you). Looking forward to taking the temperature of... Read more

We had these conversations grouped by size of firm. 

Guiding Questions:

Knowledge Management By Firm Size

How to give people the info they need, when they need it?

Is the COTE Top Ten a good framework?

This seems extremely daunting in a large firm. How do we manage content that is produced and shared... Read more

Does anyone have a spreadsheet or chart that compares the new Fitwel v2.1 with Fitwel v2.0 ?

I can't seem to find such a thing on the Fitwel website.

I am trying to determine which version-route to take on our "Workplace" project.

Or do you have experience in this that you can relay?

Thanks.

This is the body field.