Hi everyone,

Thanks so much to those of you who presented at this years AIA Show & Tell, and thanks again to ZGF for hosting! Here are the slides for some of the presentations. Please do not share the slides outside of the networks unless they are marked "PUBLIC." Hope you enjoy!

OSB subflooring typically contains formaldehyde, and wood may not be sustainably sourced.

BuildingGreen-Approved Subflooring

Products approved by BuildingGreen contain no added formaldehyde or are available with FSC-certified content.

Magnesium oxide panels, which are particularly insect and moisture resistant, are also... Read more

Hi: Great to see so many of you at AIA COTE Top Ten last week.  I'm forwarding the message below for those of you who know Marsha Maytum and can contribute to this important effort. Deadline is next Friday June 23rd!Thanks.

Mary Ann

Hello, friends,

During A'23, Je’Nen and I discussed our desire to send Marsha photos we have... Read more

At Living Future last week a woman from Google asked about cost comparisons and I shared that the City of Santa Monica conducted a study analyzing the costs of a prototypical mixed-use project for a Living Building vs. LEED v4 Platinum vs. code compliant (Title 24, part 6). I thought this group might be interested as well so here is the link... Read more

Welcome to the quiz portion of the Wood, Forests, and Embodied Carbon Webinar!

Learning Objectives
Upon completing this course, participants will be able to:

1. Explain the complex relationship between forests and carbon, with an emphasis on how carbon releases from forestry affect the sustainability of buildings that... Read more

For those at Islandwood for the Summer Summit this week, we have this post-Summit meeting opportunity with James Connelly and Kathleen Smith from ILFI. This is one in a series of "Living Building Leaders" meetings, at which architects who support LBC get to collaborate with ILFI on how scale up LBC adoption.

Here's the agenda for this... Read more

A couple Minnesota cities are considering adding electrification to their sustainable building policy (required for new construction receiving City financial assistance). Concerned that the market isn't ready for a full-on mandate, they are considering a more moderate approach of requiring developers/design teams to conduct an electrification... Read more

Hi all,

I'm curious if anyone has insight as to the "New Federal Building Performance Standards" that were announced in May of 2021 and then referenced again when E.O. 14057 came out. The memorandum for heads of agencies that was sent out with E.O. 14057 said that the CEQ would issue these standards, but I can't find a commitment to when... Read more

I am looking for anyone that specializes in this area, see the principles below.

http://universaldesign.ie/What-is-Universal-Design/

We have looked at HOK's Neurodiveristy document which is great. Are there other resources like this, or other designers/consultants you have worked with?

TIA

Kristen

Kristen... Read more

Welcome to the quiz portion of Exterior Paints: Long-Term Protection and Environmental Tradeoffs.

Learning Objectives
Upon completing this course, participants will be able to:


1. List the primary differences between alkyd and latex paints and stains and between wood, concrete, and metal primers.
2. Explain... Read more

Hi All, I was initially reluctant to share this, but I've seen similar posts and I think it's in line with our mission and interests so I'll go ahead with it.

Tomorrow 12/9 at 1 PM EST I'm moderating a panel of industry leaders in public health (as it pertains to buildings), construction finance, and project development to review the... Read more

Does anyone have a draft copy of the ASHRAE 209P standard? It has not been finalized? See an overview of it here from IBPSA 2016 summer meeting.

The 209 committee plans to release it for a 3rd public review and hopes to finalize it in late winter or early spring. I'm just trying to track down one of the earlier verisons of the document... Read more

Hi all,

We are looking to study Passive House on a couple small multifamily projects. Our understanding is that WUFI Passive only integrates with SketchUp at this time. Our BIM manager has been trying to find an example of a firm that works in Revit and uses WUFI Passive, to point him in the right direction on workflow. I offered to ask... Read more

Is LEED Online mind-numbingly slow today for anyone else? Or is it just me? I may give up and try again tomorrow. Frustrating as I was hoping to submit a final review today. :(

We should probably agree on the correct spelling for what we at BuildingGreen are calling "BITuser." I noticed that on the Salesforce portfolio screenshot provided by Dennis, it's spelled "BIT User."

BITuser has the advantage of more closely resembling LEEDuser, but it has the disadvantage of looking a little weird in all-caps, as in... Read more

Hi folks,

You may have seen this posted to the Green Gurus forum. Paula got some good responses from architects and engineers, but not so much from GCs so she asked me to follow up and post it here. Please reach out to her if you're willing to be included in these articles/reports. Thanks!

Hi! I’m working on two reports about... Read more

Hello fellow sustainable design leaders! I am about to kick off an intensive effort here at EHDD to refine our internal standards for materials. We will be considering both GWP as well as the health of materials (avoiding harmful chemicals). In addition to setting the standards, I will be working to develop a process to vet materials before... Read more

Hi all,

We have a project in New Orleans that needs to meet the GSA Inflation Reduction Act (IRA) requirements and submit EPDs. For our concrete, there is only one manufacturer that meets the requirements and is more than 50 miles away (according to EC3). Does anyone have tips on attempting to talk to local concrete manufacturers about... Read more