Hello Green Gurus!

Here are the details for the upcoming Peer Networks webinar, The Beneficial Intersection of Energy, Resilience and Health.
REGISTER HERE! Hope to see you there!

The Beneficial Intersection of Energy, Resilience and Health
April 30th, 2020
2pm - 3pm ET (11am - Noon PT)

How can three... Read more

Welcome to the quiz portion of Behind the Logos: Understanding Green Product Certifications.

Learning Objectives

Upon completing this course, participants will be able to:


Hi all-

We are dabbling in developing an official research component of our firm. We have collaborated with a class at a local university and are looking for ways to take our research to a higher level. I'm curious how some of the other firms doing design or building technology research approach the process. For instance, do you have a... Read more

Hello - I seem to remember a thread on Sustainable Design Specialist / Advisor - Focused or Integrated Position within a firm. Does anyone remember the subject header or did I just dream this up? My searches are coming up empty...

Thanks!

Mona

Mona Lemoine, Architect AIBC, MAA, MRAIC, LFA, LEED AP BD + C

Senior... Read more

We have an MEP engineer that is calculating peak loads at about 6 times passive house levels on a large commercial building that is at or near passive house levels of insulation and air infiltration. We suspect one reason is that he is figuring a 50% efficiency level for the ERV. We are showing him ERV systems with 80-90% efficiency, but they... Read more

Hello Folks,
What is your experience with successes and failures in the design process? As a starting point I have listed my Top 5 for success, and my Top 5 for failure. We'd love to see your reactions and look forward to the discussion when we all meet next week at our monthly check-in.

Top 5 reasons for when integrative design... Read more

We apologize, but the heating fuel cost calculator is no longer on the BuildingGreen website.

Take a look at Efficiency Maine's heating fuel cost calculator instead.

Welcome to the quiz portion of Is Wood Construction Green? A Look at the Issues.

Learning Objectives
Upon completing this course, participants will be able to:


1.  Determine what distinguishes wood products sourced from Forest Stewardship Council-certified forests, and why these products improve the environmental impact of... Read more

Hi all,

Just wanted to put a couple of useful webinars on your radars if you haven't heard of them yet:

#1: The Contractor’s Role in Quantifying and Reducing Embodied Carbon: Why, What and How

This webinar will provide an overview of what a contractor's role is towards embodied carbon reductions, and how two General... Read more

As BuildingGreen’s Content & Data Wrangler, Fran is a spreadsheet and content-management wiz who:

Fran also compiles data submissions... Read more

I understand the AIA 2030 team is hoping for as many firms (and projects) to submit some form of LCA data in the new DDx website this week, in order to learn how the industry is tracking embodied carbon.  We have four projects that dabbled with Tally last year, which we'd like to report this week.

Has anyone run into a hurdle where you... Read more

Old windows can be leaky and uncomfortable, but window replacements are expensive and resource-intensive.

BuildingGreen-Approved Interior Window Panels

BuildingGreen approves interior window panels with robust warranties that are designed to achieve improved thermal performance with both reduced... Read more

Hello all, there has been a fair amount of discussion about the emerging Cove Tool for early stage energy modelling and parametric optimization at our firm. I am very curious if any of you are using this software, and if so, what are your thoughts about it? 

https://www.covetool.com/

Thanks,

Esteban Matheus

Hey Peer Network! Curious, if we can crowd-source a solution here for the pervious pavers at our Omaha office (climate zone 5A). Apparently over the years we've tried to add different kinds of fill here (gravel) but it keeps... disappearing. Any recommendations with either a replacement product or fill item? 

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

Hi, Green Gurus!

We have a great opportunity available at SERA for someone to join our sustainability team as an Integrated Design and Certification Specialist. Details are posted to our website: https://www.seradesign.com/careers/
Could you please share with any good candidates that you think might be interested. And of course, I’... Read more