Dear SD Leaders: I'm writing to make sure that you've seen a letter that has been circulating protesting the ‘pro-asbestos’ rule change the EPA is considering.  The letter is soliciting firm signatures/owners (as opposed to individuals).  I encourage you to sign and/or get your firm to sign ASAP. 

Please forward as well to any firm from... Read more

Metal roofs can also provide high solar reflectance, minimizing a building’s contribution to the urban heat island effect. 

BuildingGreen-approved

Materials and finishes recognized by Energy Star maintain solar reflectance levels after three years of use of 50% for low-slope and 15% for steep-slope. Some unpainted metals and many... Read more

Hi everyone,

It was so wonderful to meet some of you last month and experience the whirlwind of a summit! I hope you've enjoyed looking over the Summit Report and the flip chart notes, and they've helped bring some order to the vast amount of material we covered. Here's one more piece for you - slides from the 5-minute presentations.... Read more

Hello everyone,

We are far too often asked to include parking in our buildings (because why shouldn't the average family have 2.1 kids, .8 pets, and 3 cars) and it always grates on me that we are putting so many resources (natural and monetary) into something that is almost certainly single use and will need to be demolished in 30 years... Read more

Hi Everyone,

It has been great to see the discussion forum gaining traction as a tool for us all. 

When we met for the first time at Greenbuild last year, we mentioned that one of the goals of the group was to have an annual in-person meeting where we could strategize on how to improve our roles, our companies, and the industry... Read more

Posting at the request of Sara Bayer of Magnusson Architecture and Planning, who will soon join this group:

"In our quest to achieve Passive House EUI levels in all of our multifamily projects in a healthy manner, we are encountering pushback on the one item that is not really code min just yet (in NYC) and adds real cost:  ERV’s.  Our... Read more

In the Passive House session at the Winter Summit, I spoke about a Massachusetts DOER report that found that meeting the new energy code in MA (passive house or better in most cases) is cheaper for some building types than traditional construction. Some of you asked to see the report. It was a power point show. On page 34 of this slide deck... Read more

Hi all, we're looking for a West Coast Regional Sustainability Specialist if you know of anyone who might be interested! They would be part of our amazing firmwide Sustainability team, and could potentially be based out of LA, Costa Mesa, San Francisco, Oakland, or Seattle. Please reach out if you know of anyone who might be a good fit, I'm... Read more

Has anyone found/used a non-PVC peel-and-stick countertop film?  Working with a client on a corporate renovation, and while we've been able to find a non-PVC product for the kitchen cabinets, I can't seem to find one that works for horizontal surfaces.  And they're looking for a cost-effective and quick-turnaround solution so don't want to... Read more

Hello to all,

Are you familiar with examples of commercial kitchens using all induction / all electric cooking, without gas or other fossil fuels?

For a dining hall for 1800 students, we are interested in precedents.

Thanks!

Tamar

Welcome to the quiz portion of Biobased Materials: Not Always Greener.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain why "biobased" is too general a term.
2. List the primary concerns associated with biobased building materials, finishes and furnishings, and wet-... Read more

Hello Green Gurus,

I'm excited to share another Peer Networks webinar we have on deck for August, coming up next week!

Register HERE.

“How Good is this Product?” - Multi-Attribute Assessment of Products and Product Selection Management Tools
Thursday, August 19th, 2021
12pm - 1pm ET (9am - 10am PT)

... Read more

We have all these resources out here in the ether but it’s so hard to pull them into one spot! I was asked, last minute to join a client call today to help convince both the client (affordable housing developer) and the mechanical engineers to "stick with" a commitment to 100% electric design that was publicly stated when the competition was... Read more

I'm writing an article surveying and comparing various embodied carbon tools, including whole-building LCA tools. I'm looking for interviewees who have used at least TWO of the three major LCA tools currently in use in North America (Tally, Athena IE, and One Click LCA). If you've tried all three, all the better! If you or someone in your firm... Read more

Office furniture’s materials and components can come from unsustainable sources, and use adhesives that emit formaldehyde or other volatile compounds.

BuildingGreen-Approved Furniture

BuildingGreen approves tables, desks, and other office furnishings certified to BIFMA’s multi-attribute level 3 standard, which requires low... Read more

Hello Everyone,

Here is the information and invitation to complete the SCL Demographics Survey! If you have multiple company colleagues on this forum (you can check in the group list here click "Group members" tab), please coordinate to have only one of you submit survey responses.

If you would you like to gather your answers... Read more