Does anyone have a good recommendation for getting started with energy modeling with future weather files? We use a combination of Sefaira and Climate Studio, but open to suggestions. Even just links on how to approach this for making good recommendations to clients. Thanks in advance.

Hi SAL friends,

As some of you have heard by now, we've decided to shut down this Peer Network.

After several years of trying, we have not managed to activate it as we had hoped. Given the urgency of the collective action we need to transform the building industry into a force for good in the world, we all need to focus our... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than ever. But higher performance... Read more

Preservative treatments extend the service life of wood, but many such treatments are highly toxic, especially to aquatic life.

BuildingGreen-Approved Preserved Wood

Products approved by BuildingGreen use chemicals (commonly borates) that are relatively low in toxicity and have low VOC emissions.

Health and Environmental... Read more

Hi all,

Looking from insights from anyone who's been through WELL certification before - we've got a lab/office project pursing WELL down in Florida that is struggling to meet the turbidity level requirements of the WELL W01 prerequisite, specifically with the hot water supply, and we're not sure how to best remediate the issue.  Should... Read more

We apologize, but the heating fuel cost calculator is no longer on the BuildingGreen website.

Take a look at Efficiency Maine's heating fuel cost calculator instead.

Financial literacy and speaking with clients on their terms. Guiding Questions:

We are looking to refine our general office specifications to weed out harmful materials and to prioritize sustainability for all of our clients. Have you had good experience with outsourced specification writers who are helping to push sustainability forward? Who do you recommend? Bonus points if they are familiar with Massachusetts codes and... Read more

Hi everyone - 

The State of Oregon just posted this Policy Analyst Job Posting. The position is specifically looking for someone to assist in embodied carbon and other sustainable code items. I have heard directly from Oregon's Building Code Division that even though the position is looking for public policy, an architect or engineer (or... Read more

Hi folks,

It was fun going back over all the great conversations we had and pulling them together in this report. Please feel free to share it with anyone--no constraints on that!

Also, we'll have a webinar next Friday based on this report-- March 8 at 2pm eastern:

I'll show the report and share key takeaways from the 12th... Read more

Here are some EDI resources from our internal discussions about EDI. Please don't share them with any identifying information outside this group as they do not reflect our official policies, yet. The Social Justice Research Presentation shows some of the research we have done into Just., B Corps, Benefit Corporations and Global Reporting... Read more

Hello!

I'm curious what other firms like to use to run site-specific sun path and wind path analysises that is relatively intuitive to use and generates good graphics. We have used the climate consultant software for wind roses which is free and simple. We've also used sefaira but we're hoping to crowd source more resources. We purchased... Read more

We have several projects that are small enough that we don't hire consultants to run energy models. I just received permission to do some training so that I can run these models myself. I am looking at doing this training on eQuest:

https://www.udemy.com/course/equest-energy-modelling-detailedtraining/?c...

I am thinking it would... Read more

Hi all,

Here's a good follow up to Maria's steel question on Monday.  We have a Midwest project that unfortunately (from a carbon perspective) is required to use a traditional, thick precast facade.  We’re working with the contractor and potential future (not yet bid out) fabricators to determine an appropriate % of pozzolanic material... Read more

I'm putting together information on natural gas bans (or put another way, all electric buildings) for an advocacy effort and looking for some experts. Anyone have thoughts on banning natural gas and other fossil fuels on residential projects? Specifically what are the considerations/challenges/opportunities at each scale (single family, low... Read more

I'm pleased to announce that the AIA Board of Directors has unanimously adopted the A&D Materials Pledge as the AIA Materials Pledge!!!!! The support of so many of you was a key factor in making it so easy for the AIA Board to adopt The Pledge. The Materials Pledge now has 90 signatory firms, including many of yours. Thank you all.  Now,... Read more

Welcome to the quiz portion of Full-Blown Energy Modeling.

Learning Objectives
Upon completing this course, participants will be able to:


1. Explain the role of the energy modeler and how each energy model opens an informed discussion between the entire project team about the interactions between architectural and... Read more