All,

I've probably spoken to a few of you over the phone, but I wanted to make sure all of you know that we are hosting a 4 part webinar series on our Tally LCA software, kicking off tomorrow 10/10. We just released the new of Tally version and ended up doing far more development work than initially anticipated, in no small part due to... Read more

Hello all,

This month's SCDL call was full of great discussion! We decided this month that we are feeling good about where we are for the Task Force Agreement on defining social sustainabiltiy in our work. The aim is to work with this agreement for a while and see if it holds up as a process framework. There was also interest to invite... Read more

Hello,

We’re looking for Design Energy Code Equivalents for Chinese commercial energy codes. Do any of you have  any good sources? I’ve only found data comparing ASHRAE 90.1 2013 to the Chinese Code at that time. We understand the Chinese code require a 65-75% energy savings over the baseline but don’t have good information for defining... Read more

On a large sports project, we worked with the structural engineer to spec low carbon / high SCM concrete mixes. Much of the floor area will be sealed and polished concrete, and a concrete sub is pushing back on the SCMs saying they should not be above 20% (with a preference for 0%) for the polish to finish properly, per the manufacturer. Anyone... Read more

I'm still basking in the glow of yet another great Summit. I hope others who were there are feeling the same.

Here are the flip-chart pages from the many round-table conversations. Five-minute presentations to come shortly, followed by the Summit Report.

Feel free to use this thread to share other resources and thoughts.

... Read more

I'm sure most (if not everyone) is aware that LEEDv5 is under public review until May 20, 2024. I know I need to make time to flip through it, review, and comment, but I'm having a heckuva time protecting the time in my calendar to do that. Anyone interested in joining me for a 60 - 90 minute meeting to do this together as an accountability... Read more

Nadav Malin is a passionate facilitator, leading workshops and retreats to help organizations of all types find alignment, inspiration, and leadership in pursuit of their goals. He convenes peer networks of architecture firm Sustainable Design Leaders, Sustainable Construction Leaders, and others. He facilitates gatherings and consults to USGBC... Read more

Hello Green Gurus,

Here is the information for your October Peer Networks Webinar, Advocating for Electrification. We hope you will join us!

Register HERE.

Advocating for Electrification
October 26th, 2020
1pm - 2pm ET (10am - 11am PT)

Description
Hear from leaders in the AEC and policy community on... Read more

Hello Everyone,

I'm looking for projects in Chicago that are exemplary in at least one of the following topics: Biophilia, Sustainability, Resilience, or Well-being. I know there is overlap in these topics but we're doing an internal design exercise and are looking at how these different ideas relate and are articulated in buildings. We'... Read more

Hi folks!

Do you have examples or case studies of projects with compelling examples of circularity/salvaged material reuse? We’re looking to go beyond the examples we've seen of furniture reuse or creating art from salvaged material, and we’d like to collect some examples to get our client excited about the possibilities in a deep... Read more

THIS WEBINAR PURCHASE AND REGISTRATION IS CLOSED.

Live webinar approved for 1 AIA LU and 1 GBCI CE hour. Each person intending to earn CEU credits must purchase their own seat.

Why high-performance assemblies? And why now? Today we demand better thermal performance from our building assemblies than... Read more

Welcome to the quiz portion of Resilient Design: 7 Lessons from Early Adopters

Learning Objectives
Upon completing this course, participants will be able to:


1. Recount the ten resilient design principles.
2. Recount each of the seven fundamental messages embraced by the model practitioners.
3. Describe... Read more

Upon completion of this course, participants will be able to:

Be aware of key dates in the history of the LEED rating system.

Have a clear understanding of the new impact areas present in the updated rating system.

Ascertain which types of new credits belong to which impact areas in the LEED v5 rating system.

Has anyone had experience working with Hyper Metro (http://hypermetro.co/)? If so, did you find this company to provide value especially in dense urban environments where on-site segregation poses challenges to manage multiple C&D material streams on site? Hyper Metro claims to be able to provide rebates and to pay us for our trash.

Show & Tell Breakout: share what’s working and what isn’t! Which tools are your favorites? Have you developed any innovative applications? Discovered new pitfalls?

Presentations:

Hi Green Gurus, 

I am happy to join this group, and would like to share a short introduction of myself. I’m Jais, and I am with FXCollaborative as a Sustainability Design Specialist working with Ilana Judah. I have been here little over a month and am enjoying it so much! 

I have studied architectural design focused on... Read more

Hey all - sorry I won't be able to join our call today. I had a client request an emergency meeting today (boo) because corporate mandated that they eliminate fossil fuel use from all their buildings (yay!) by 2025 and they've got a project underway that needs to pivot quickly. 

Had I been able to join, I wanted to share this in case... Read more

Good HVAC instrumentation and control systems improve occupant comfort, save energy, and help prolong the lifespan of the equipment.

BuildingGreen-approved

Products approved by BuildingGreen include occupancy sensors, programmable thermostats, digital controllers, wireless systems, and other equipment that help monitor and control... Read more

July 29-31, 2020
Chicago, Illinois

Learn more and register

Tuesday, Mar. 17, 11am EDT

Tuesday... Read more