Hi all,

As discussed in our monthly meetings, we are assembling an industry push to expand the availability of embodied carbon data for MEP equipment. Our first steps are to send a letter to industry announcing a call to action and future educational webinars on the topic. In a similar manner as the electrification letter by the SMEP... Read more

Hello All,

A group of us (three architects and a builder- sounds like there should be a joke here) were debating this and we  are stumped.

Application: Residential exterior trim.

50 year warrantied composite product of agricultural byproduct with PVC (EPD not published yet) vs 100 year (if primed on all sides and painted or... Read more

Welcome to the quiz portion of Resilient Design: 7 Lessons from Early Adopters

Learning Objectives
Upon completing this course, participants will be able to:


1. Recount the ten resilient design principles.
2. Recount each of the seven fundamental messages embraced by the model practitioners.
3. Describe... Read more

I'm hoping someone knows the anser to this question. For the LEED ND certification the minimum requirement is "The LEED project should contain at least two habitable buildings and be no larger than 1500 acres." Does habitable mean buildings with dwelling units?

Welcome to the quiz portion of Saying Goodbye to the Office—and Hello to Housing!

Learning Objectives
Upon completing this course, participants will be able to:


With the increasing need to support design with techncial expertise, I am curious to hear how others are meeting this challenge.  Do you build energy models in-house?  Do you have a team of experts whose sole responsibility is to support design teams with tasks such as energy modeling and LCA, or is that expertise distributed throughout the... Read more

Welcome to the quiz portion of Counting Carbon: Understanding Carbon Footprints of Buildings.

Learning Objectives
Upon completing this course, participants will be able to:


1. Differentiate carbon counting approaches based on regulation or monetization from approaches aiming just to reduce carbon emissions.
2... Read more

Columbia already offers access to free EV charging for our field employees. Of the few projects that have have opted in so far, we've had to custom design and intall EV charging setups. It's good that we're doing this, but it won't scale quickly enough and cost effectively.  I think a practical next step is working with trailer companies so... Read more

I wanted to alert you to this opportunity to help develop a new ASHRAE Standard. They are especially looking for people who have not served with ASHRAE previously (aka the usual suspects)

ASHRAE Standard 242P, Standard Method for Calculation of Building Operational Greenhouse Gas Emissions

1 Purpose: This standard provides a... Read more

FILTER BY NETWORK

FILTER BY REGION

So our last webinar effort flamed out with the overloaded internet, but we've regrouped and have the session scheduled for this Thursday 4/2 at 1:10.  We pre-recorded the webinar to make sure everything goes smoothly and I have to say that Mike is delivering some pretty fantastic content. It doesn't engage LCA tools, rather focusing on core... Read more

Hello Sustainability Leaders,

Great to see some of you at Greenbuild last week.  Thanks to all who responded to Nadav’s post-election blues post.  Lots of helpful insights and sentiments that left me very grateful to be part of this community.  On a related note, since the election I’ve been asked by people in our office and in life if... Read more

Hi Everyone,

Who has worked on a SITES certification and can share the approximate hours involved for administering and completing documentation? A relative sense of the effort compared to LEED would also be helpful, similar to the thread about WELL on this same subject. 

Appreciate any insight. Thanks! -Hilary

Ace Brockwell

Has anyone had a Contractor track GHG emissions during construction? If so, any advice on how to include that in the project specifications?

Thanks!

Yarden

I'd love to hear thoughts from the design, consulting, and contracting firms in this group about ways to make our specs more inclusive, or at least less exclusive to minority and women owned contractors and subcontractors and others that have not had the benefit of what a recent "Equity in Specs" presenter termed the "Fathers / Brothers / In-... Read more

Has anyone here found an alternative to XPS for the void former?

A structural engineering contact was included in recent conversations about embodied carbon in insulation materials and brought to our attention that this is a common use for XPS that has nothing to do with its insulating properties. It is typically used where concrete is... Read more